JVC DT-V1710CGU Instruction Manual - Page 31
SPECIFICATIONS, Input card : optional
UPC - 046838208102
View all JVC DT-V1710CGU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
SPECIFICATIONS (Input card : optional) Ⅵ Precautions when attaching an input card with dip switches Some input cards have two dip switch arrays: dip switch array S101 on the upper part of the connector terminal and dip switch array S102 on the lower part. The surface of these switches is pre-coated with a film on shipment from the factory. When problems arise, such as not being able to set functions properly with the dip switches, be sure to check the following: S101 Dip switch array S101 1O 2N 3 4 5 6 7 8 The numbers 1 to 16 on the PC board to the right of the respective dip switches indicate the respective switch. Make sure that switches 1 and 16 are set to OFF. • The numbers 1 to 8 on the dip switch array S101 indicate dip switches 1 to 8, while the numbers 1 to 8 on dip switch array S102 indicate dip switches 9 to 16. • A switch is ON when it is set to the right side (where ON is indicated) and OFF when it is set to the left side. The figure on the left is the factory default setting, wherein all of the selector switches are set to OFF. 8 7654321 Connector terminal (side for slot insertion) Switch numbers S102 1O 2N 3 4 5 6 7 8 16 15 14 13 12 11 10 9 31