JVC HR-S5900U Instructions - Page 11

Setting clock semiautomatically - Semiauto Clock Set You can change the host channel/D.S.T. /time zone 1 3 setting manually. First follow steps to on page 10, then go to the 4following steps. Set Auto Clock to ON Press SHUTTLE PLUS # CLOCK SET to move the highlight bar to "AUTO CLOCK", then press SHUTTLE PLUS %fi so that "ON" is selected. Then; TIME DATE YEAR 1:00PM 12/24 00 SUN AUTO CLOCK : ON HOST CH : AUTO (CATV) D.S.T. : AUTO TIME ZONE : AUTO PRESS (5,∞), THEN (OK) PRESS (MENU) TO END To select the host 5 channel - go to step . 6 To select the D.S.T. mode - go to step . 7 To select the time zone - go to step . NOTE: The time set previously will be erased when "AUTO CLOCK", "HOST CH", "D.S.T." or "TIME ZONE" 5 setting is changed. Select host channel You can either select "AUTO" or enter a PBS channel number. Press SHUTTLE PLUS # to move the highlight bar to "HOST CH", then press SHUTTLE PLUS %fi until "AUTO" or the desired PBS channel number is selected. NOTE: Some PBS channels do not transmit clock setting data. 6 Select D.S.T. mode You have three choices: EN 11 AUTO- Select if you want to adjust your VCR's clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time*) ON- Adjustment will be made by the built-in clock itself. OFF- Select when Daylight Saving Time does not apply to you. Press SHUTTLE PLUS # to move the highlight bar to "D.S.T.", then press SHUTTLE PLUS %fi 7 repeatedly until the desired setting is selected. Select time zone You can select the time zone automatically or manually. Press SHUTTLE PLUS # to move the highlight bar to "TIME ZONE", press SHUTTLE PLUS %fi repeatedly until "AUTO" or the desired time zone is selected. Each time you press the button, the time zone changes as follows: = AUTO = ATLANTIC = EASTERN = CENTRAL = MOUNTAIN = PACIFIC = ALASKA = HAWAII = (back to the beginning) NOTE: If an incorrect clock time is displayed by the Plug & Play setting, you may be receiving the clock setting data of a PBS channel from an adjacent time zone or 5 from an incorrect PBS channel from a cable TV system. If you selected "AUTO" for the host channel in step , 8 be sure to select the correct time zone manually. Return to normal screen Press MENU. * Auto Daylight Saving Time This function enables automatic adjustment of the VCR's clock at the start and end of Daylight Saving Time. With Auto DST activated on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM. . . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM. IMPORTANT Turn off the VCR after performing Semiauto Clock Set. "Auto" will appear on the front display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.