JVC HR-S5900U Instructions - Page 13

Tuner Setting Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. 1 2 3 2 4 5 6 7 8 9 0 4 1 1 4 3 2 3 2 3 EN 13 Setting channels automatically - Auto Channel Set Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting. If you want to add 1or delete channels, use Manual Channel Set (੬ pg. 14). Access Main Menu screen Press MENU. 2 Access Tuner Set screen Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to "TUNER SET", then press OK or SHUTTLE PLUS #. MAIN MENU FUNCTION SET = TUNER SET INITIAL SET PRESS (5,∞), THEN (OK) PRESS (MENU) TO END Perform Auto Channel Set 3 You can automatically set the receivable channels in your area in the order of their TUNER SET BAND CATV = AUTO CHANNEL SET MANUAL CHANNEL SET frequencies. Press SHUTTLE PLUS %fi to move the SELECT WITH (5,∞) AND (OK) PRESS (MENU) TO END highlight bar (arrow) to "AUTO CHANNEL AUTO CHANNEL SET SET", then press OK or SHUTTLE PLUS #. SCANNING... PRESS (MENU) TO END NOTES: ● When Auto Channel Set is complete, "SCAN COMPLETED" appears on screen. ● If the scan was unsuccessful, "SCAN COMPLETED- NO SIGNAL" appears on screen. Check the connections and start again. Return to normal screen 4 Press MENU. INFORMATION The VCR selects the correct band (TV or CATV) automatically during Auto Channel Set. The selected band will be displayed on the right side of "BAND" on the Tuner Set screen.