JVC HR-S5900U Instructions - Page 49
Audio Dubbing
UPC - 046838158841
View all JVC HR-S5900U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Audio Dubbing (ONLY FOR HR-S5900U/5910U) Connection This VCR (for recording) POWER S VIDEO VIDEO (MONO)L-AUDIO-R REC LINK S-VHS ET To AUDIO IN A.DUB INSERT PLAY REW FF + CH- /+ PUSH / TURN 24HR QUICK PROGRAM REC PAUSE STOP/EJECT Audio cable (not supplied) To Audio output CD player (as the audio source) ● Audio Dubbing is also possible using the audio input connectors on the rear panel. You can replace sounds recorded on the normal track with new sounds - for example, your favorite song played back on the CD player. ● Refer also to the other audio component's instruction manual for connection and its operations. Normal track Before audio dubbing After audio dubbing Video and Hi-Fi track 1 Make connections Connect an audio cable between the VCR's audio input connectors and the audio component's audio output connectors. ● If the audio component is monaural, connect the AUDIO L (MONO) input connector on the VCR. EN 49 2 Load a cassette and prepare the audio source 3 Select input mode Select "F-1" - when connecting the audio component to the audio input connectors on the front panel. Select "L-1" - when connecting the audio component to the audio input connectors on the rear panel. On the front panel: Push the JOG dial, then turn it to the left or right. On the Remote: Press the Number key "0 (AUX)" or CH +/-. Locate start point 4 1 Press PLAY ( 3 ) to start playback. 2 Press PAUSE ( 8 ) when you find the beginning 5 of the scene for which you want to audio-dub. Activate editing mode Press A.DUB on the front panel. ● The VCR enters the Audio Dubbing pause mode. ● blinks, and light up on the front 6 display panel. Start audio dubbing Press PLAY ( 3 ) on this VCR and start playing the audio source. ● blinks and display panel. is displayed on the front To stop audio dubbing Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel. ● Audio dubbing automatically stops when the counter reading becomes "0:00:00", and the VCR starts normal playback. NOTES: ● During Audio Dubbing, the sound recorded on the normal track is selected as the monitor sound. If you want to listen to the Hi-Fi or mixed sound (Hi-Fi sound and monaural sound), see "Selecting monitor sound - Audio Monitor" (੬ pg. 23). ● Audio Dubbing cannot be performed on a tape with its record safety tab removed. ● When playing back an audio-dubbed tape, select the sound you want. See "Selecting monitor sound - Audio Monitor" (੬ pg. 23). ● Picture may be distorted if you pause Audio Dubbing.