JVC HR-S5900U Instructions - Page 34
Express Timer, Programing
UPC - 046838158841
View all JVC HR-S5900U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
34 EN Express Timer Programing Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. POWER DAILY 1 2 3 2 4 5 6 7 8 9 WEEKLY 0 4 0 3 4 7 5 1 2 9 6 8 3 9 TIMER RECORDING (cont.) You can directly program the VCR's timer to record up to 8 broadcasts, as far as a year in advance. Remember, the clock must be set before you can program the timer (੬ pg. 8 or 10). Load a cassette 1 Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR. ● The VCR turns on, and the counter is reset, automatically. Access VCR PLUS+ screen 2 Press PROG.. Access Program screen 3 Press START +/- once. (If no program is stored, "PROGRAM 1" appears.) PROGRAM 1 START STOP - -:- -AM = - -:- -AM DATE CH - -/- -/- - - - - SP PRESS (+/-, SP/EP, 8=DAILY, 9=WEEKLY), THEN (0K) PRESS (PROG.) TO END 4 Set program start time Press START +/- repeatedly to enter the time you want recording to start. ● Press and hold START +/- to increase the time in 30-minute intervals. PROGRAM 1 START STOP 8:00 AM = - -:- -AM DATE CH - -/- -/- - - - - SP PRESS (+/-, SP/EP, 8=DAILY, 9=WEEKLY), THEN (0K) PRESS (PROG.) TO END Set program stop time 5 Press STOP +/- repeatedly to enter the time you want recording to stop. ● Press and hold STOP +/- to increase the time in 30-minute intervals. Set program date 6 Press DATE +/-. (The current date is displayed on the screen. The date you enter appears in its place.) Set channel number 7 Press CH +/-. ● If you are using a DBS receiver, see "ATTENTION FOR DBS RECEIVER USERS" on next page. ● Holding down CH +/- rapidly changes the channel numbers.