JVC HR-S5900U Instructions - Page 42

42 EN OTHER USEFUL FUNCTIONS (cont.) * The default setting is bold in the table below. Ⅵ AUDIO MONITOR HI-FI: Normally select this. Hi-Fi sound is played back. HI-FI L: Sound on the left Hi-Fi channel is played back. HI-FI R: Sound on the right Hi-Fi channel is played back. NORM: Sound on the normal track is played back. MIX: Both sounds on the Hi-Fi track and normal track are mixed and played back. This VCR can record two sound tracks simultaneously (normal and HiFi) on a Hi-Fi stereo tape. You can select the sound track(s) to listen to while playing back a Hi-Fi stereo tape. In addition, when playing back a prerecorded tape containing two separate audio programs on the Hi-Fi tracks, you can choose either one by selecting either "HI-FI L" or "HI-FI R". NOTES: ● While playing back a monaural tape, sounds on the normal track will be heard regardless of this setting. ● If RF connection (੬ pg. 7) is used for viewing pictures on the TV, sound will be monaural even though you select "HI-FI". ● You can also use the A. MONITOR button on the Remote to select the desired monitor sound. (੬ pg. 23) Ⅵ S-VHS MODE ON OFF You can determine which recording mode - either S-VHS mode or VHS mode - is used for recording on S-VHS tapes. When this function is set to "ON", you can record on S-VHS tapes with S-VHS picture quality. When this function is set to "OFF", you can record on S-VHS tapes with VHS picture quality. NOTES: • S-VHS mode allows you to make high quality video recordings with horizontal resolution of 400 lines, comparing with the 230 lines of resolution of conventional VHS recordings. To achieve the highest quality picture we recommended to record in S-VHS mode. (But remember that a conventional VHS VCR without SQPB cannot play back S-VHS tapes recorded in S-VHS mode.) • S-VHS MODE setting does not affect recording on VHS tapes. Recording on VHS tapes is always performed in VHS mode except when using S-VHS ET mode (੬ pg. 27). Ⅵ AV COMPU-LINK ON OFF The REMOTE PAUSE/AV COMPULINK terminal on the rear panel can be used as either the REMOTE PAUSE terminal or the AV COMPULINK terminal. When this function is set to "ON", you can use the this terminal as the AV COMPULINK terminal. By connecting other JVC's AV COMPULINK components (see the diagram on page 43), including amplifiers (or receivers) and televisions, one touch control of the audio and video components linked via their AV COMPULINK connectors becomes possible. For example: simply load a cassette in the VCR and press PLAY ( 3 ) and the AV COMPULINK components automatically turn on, the TV's AV mode is selected and the VCR starts playback. (You do not have to press PLAY ( 3 ) if the cassette's record safety tab is removed.) When this function is set to "OFF", you can use this terminal as the REMOTE PAUSE terminal. (੬ pg. 47) NOTE: Connection varies depending on the type of JVC TV you have. Refer to the TV's instruction manual when making this connection. CONTINUED ON NEXT PAGE \