JVC HR-S5900U Instructions - Page 47

Set Av Compu-link To Off, Set Picture Control To Edit

Get JVC HR-S5900U - Super-VHS VCR PDF manuals and user guides
UPC - 046838158841
View all JVC HR-S5900U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

You can use a camcorder as the playback VCR and your 1VCR as the recording VCR Make connections Connect an audio/video cable between the camcorder's audio/video output connectors and your VCR's audio/video input connectors. ● When the JVC camcorder is equipped with the Master Edit Control, you can control the VCR from the camcorder. Connect the mini-plug cable (not supplied with this VCR) as illustrated to the left. ● When using a camcorder with a monaural output, connect the audio output connector on the camcorder to the left audio input connector 2 on this VCR. Load a cassette Insert the cassette to be recorded on into this 3 VCR (for recording). Select input mode on this VCR Select "L-1" - when connecting the camcorder to the audio/video input connectors on the rear panel. Select "F-1" - when connecting the camcorder to the audio/video input connectors on the front panel. On the front panel: Push the JOG dial, then turn it to the left or right. On the Remote: 4 Press the Number key "0 (AUX)" or CH +/-. Select video input terminal Follow the procedure described on pages 39 and 43. When using S VIDEO terminal, set "FRONT AUX INPUT" (or "REAR AUX INPUT" if you use the connectors on the rear) to "S-VIDEO". When using VIDEO terminal, set "FRONT AUX 5 INPUT" (or "REAR AUX INPUT") to "VIDEO". Set "PICTURE CONTROL" to "EDIT" Follow the procedure described on pages 39 and 40. 6 If your camcorder is a JVC Master Edit Control- equipped type - go to step . 7 If your camcorder is NOT a JVC Master Edit Control-equipped type - go to step . EN 47 6 Set "AV COMPU-LINK" to "OFF" Follow the procedure described on pages 39 and 42. ● The REMOTE PAUSE/AV COMPU-LINK connector works as the Remote Pause connector when "AV COMPU-LINK" is set to 7 "OFF". Return to normal screen 8 Press MENU. Start playback Press PLAY ( 3 ) on the camcorder. NOTE: If the camcorder is equipped with a superimpose/OSD disable feature then set it to "OFF" before starting 9 playback. Start recording On the front panel: Press REC ( ¶ ). On the Remote: Press REC ( ¶ ) and PLAY ( 3 ) at the same time. ● If you are using a Master Edit Control-equipped JVC camcorder, recording starts automatically on this VCR. (Refer to camcorder's instruction manual.) NOTE: Be sure to select "AUTO" for "PICTURE CONTROL" (or "NORM" when "VIDEO CALIBRATION" is set to "OFF") after you finish dubbing the tapes (੬ pg. 39 and 40).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
EN
47
You can use a camcorder as the playback VCR and your
VCR as the recording VCR
Make connections
Connect an audio/video cable between the
camcorder’s audio/video output connectors and
your VCR’s audio/video input connectors.
●
When the JVC camcorder is equipped with the
Master Edit Control, you can control the VCR
from the camcorder. Connect the mini-plug
cable (not supplied with this VCR) as illustrated
to the left.
●
When using a camcorder with a monaural
output, connect the audio output connector on
the camcorder to the left audio input connector
on this VCR.
Load a cassette
Insert the cassette to be recorded on into this
VCR (for recording).
Select input mode on this VCR
Select “L-1” — when connecting the camcorder
to the audio/video input
connectors on the rear panel.
Select “F-1” — when connecting the camcorder
to the audio/video input
connectors on the front panel.
On the front panel:
Push the
JOG
dial, then turn it to the left or right.
On the Remote:
Press the
Number
key "
0 (AUX)
" or
CH +/–
.
Select video input terminal
Follow the procedure described on pages 39 and
43.
When using S VIDEO terminal,
set “FRONT AUX
INPUT” (or “REAR AUX INPUT” if you use the
connectors on the rear) to “S-VIDEO”.
When using VIDEO terminal,
set “FRONT AUX
INPUT” (or “REAR AUX INPUT”) to “VIDEO”.
Set “PICTURE CONTROL” to “EDIT”
Follow the procedure described on pages 39 and
40.
If your camcorder is a JVC Master Edit Control-
equipped type — go to step
.
If your camcorder is NOT a JVC Master Edit
Control-equipped type — go to step
.
Set “AV COMPU-LINK” to “OFF”
Follow the procedure described on pages 39 and
42.
●
The REMOTE PAUSE/AV COMPU-LINK
connector works as the Remote Pause
connector when “AV COMPU-LINK” is set to
“OFF”.
Return to normal screen
Press
MENU
.
Start playback
Press
PLAY (
3
)
on the camcorder.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set it to “OFF” before starting
playback.
Start recording
On the front panel:
Press
REC (
)
.
On the Remote:
Press
REC (
)
and
PLAY (
3
)
at the same time.
●
If you are using a Master Edit Control-equipped
JVC camcorder, recording starts automatically
on this VCR. (Refer to camcorder’s instruction
manual.)
NOTE:
Be sure to select “AUTO” for “PICTURE CONTROL” (or
“NORM” when “VIDEO CALIBRATION” is set to “OFF”) after
you finish dubbing the tapes (
±
pg. 39 and 40).