JVC KWAVX800 Instructions - Page 60

ENGLISH Disc Surround*17 Menu items Surround Surround Mode Panorama Center Width*18 Selectable settings, [reference page] On, Off, [24] Auto, Through, Dolby PLIIMovie, Dolby PLII Music, [24] On, Off, [24] 00 to 07; Initial 04, [25] *17 Selectable only for "DISC", "SD," and "USB." *18 This setting takes effect only when the center speaker is activated. Equalizer Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3, [51] Sound Menu items Fader/Balance Volume Adjust Subwoofer Phase Subwoofer Level*19 High Pass Filter Selectable settings, [reference page] Adjust fader-speaker output balance between the front and rear speakers. • Upmost-front only (F6) • Downmost-rear only (R6) When using a two-speaker system, set the fader to the center (0). Adjust balance-speaker output balance between the left and right speakers. • Leftmost-left only (L6) • Rightmost-right only (R6) Adjust and store auto-adjustment volume level for each source, comparing to the FM volume level. The volume level will automatically increase or decrease when you change the source. -12 to +12; Initial 00 • For Disc/SD/USB: An auto-adjustment level is commonly used when playing DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC files Select either or , which reproduces a better sound. Adjust the subwoofer output level. Level: -06 to +08; Initial 00 Through: Select when the subwoofer is not connected. On: Select when the subwoofer is connected. *19 This subwoofer level setting takes effect only when surround is deactivated. ( also page 24) 60