JVC KWAVX800 Instructions - Page 65

ENGLISH More about this unit General Turning on the power • By pressing SOURCE on the monitor panel, you can also turn on the power. If the source is ready, playback starts. Speaker/signal indicators for DVD Speaker indicators Signal indicators FM/AM Storing stations in memory • When SSM is over, received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency). Disc General • In this manual, words "track" and "file" are interchangeably used. • This unit can also play back 8 cm (3-3/16 inch) discs. • This unit can only play back audio CD (CD-DA) files if different type of audio files (MP3/WMA/WAV/AAC) are recorded in the same disc. • This unit can display only one-byte characters. No other characters can be correctly displayed. Inserting a disc • When a disc is inserted upside down or has no playable files, "Cannot play this disc Check the disc" appears on the monitor. Eject the disc. Ejecting a disc • If "No disc" appears after removing a disc, reattach a disc or select another playback source. • If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. • The speaker indicators-square around the letters lights in light blue when the corresponding speakers are set to or . • The center speaker indicator-square around "C" lights in light blue, when the center speaker is set to or and when surround is activated. • Sounds come out of the speakers whose speaker indicators are lit. • The SW indicator lights up when is set to . • The signal indicators indicate the incoming signals-L (front left) / R (front right) / C (center) / LFE (low frequency effect) / LS (left surround) / RS (right surround) / S (monaural surround). • If the speaker is activated, but the signals corresponding to the speaker are not coming in, the signal indicators changes their color from white to black to indicate no signals coming in. Changing the source • If you change the source with Dual Zone deactivated, playback also stops without ejecting the disc. Next time you select "DISC" for the playback source, disc play starts from where it has been stopped previously. Continued on the next page 65 REFERENCES