Kenwood 6070 Instruction Manual

Kenwood 6070 - VR AV Receiver Manual

Get Kenwood 6070 - VR AV Receiver PDF manuals and user guides View all Kenwood 6070 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood 6070 manual content summary:

  • Kenwood 6070 | Instruction Manual - Page 1
    RECEIVER VR-6070 KRF-X9060D INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area. About the supplied remote control Compared to standard remote controls, the remote control
  • Kenwood 6070 | Instruction Manual - Page 2
    code: Blue : Neutral Brown : Live Do not connect those leads to the earth terminal of a three-pin plug. Caution : Read this page carefully to ensure safe operation. * AC voltage selection OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
  • Kenwood 6070 | Instruction Manual - Page 3
    safe operation. carefully to ensure Preparations Before applying the power 2 Safety precautions 2 Unpacking 3 How to use this manual 4 Special features 5 Names and functions of parts 6 Main Unit 6 Remote control unit (RC-R0813) (VR-6070) and (RC-R0814) (KRF-X9060D 7 Remote control unit
  • Kenwood 6070 | Instruction Manual - Page 4
    is connected. - - Consult the dealer or an experienced radio / TV technician for help. For the U.S.A. FCC Compliance Notice Audio-video Receiver, VR-6070 These devices comply with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
  • Kenwood 6070 | Instruction Manual - Page 5
    setup procedure to register the components you have connected. RF remote signal (For VR-6070 only) You can operate the receiver by sending RF remote signal from the remote control. The controllable range of the remote control is not influenced by surroundings such as distance or an obstruction
  • Kenwood 6070 | Instruction Manual - Page 6
    For VR-6070) STANDBY ON/STANDBY A SPEAKERS B THX SPEAKER EQ ACTIVE EQ DOLBY DIGITAL DTS CS II THX SPEAKER EQ ACTIVE EQ DSP STEREO INPUT MODE DIMMER POWER -ON -OFF PHONES DVD/6CH CD/DVD PHONO TUNER VIDEO 1 VIDEO 2 VIDEO 3 MD/TAPE SOUND TONE SETUP BAND AUTO MEMORY VOLUME CONTROL MULTI
  • Kenwood 6070 | Instruction Manual - Page 7
    Names and functions of parts Remote control unit (RC-R0813) (VR-6070) and (RC-R0814) (KRF-X9060D) This remote control unit can be use not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer's setup codes. Only remote control RC-R0813 has RF
  • Kenwood 6070 | Instruction Manual - Page 8
    only) This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer's setup codes. r 1 2 3 4 5 6 7 8 9 0 SOURCE POWER LEARN DVD CD CBL/SAT REMOTE MODE VCR TV OTHERS RECEIVER THX 1 2 3 LISTEN MODE
  • Kenwood 6070 | Instruction Manual - Page 9
    . If the input signal is analog, the ANALOG indicator will light up. To keep the receiver set to the currently selected listening mode, use the INPUT MODE key to select "DIGITAL MANUAL" (manual sound). However, even when this setting is selected, there may be cases in which the listening mode is
  • Kenwood 6070 | Instruction Manual - Page 10
    Setting up the system Connecting audio components SYSTEM CONTROL jacks & Shape of AC outlets U.S.A. and Canada U.K. Australia Other countries To AC (MC) cartridge record player cannot be used directly from the receiver unit. It can only be used when another equalizer amplifier is connected.
  • Kenwood 6070 | Instruction Manual - Page 11
    Setting up the system Connecting video components S Video jacks S VIDEO OUT VIDEO S VIDEO IN VIDEO S VIDEO IN VIDEO S VIDEO IN VIDEO S VIDEO IN VIDEO S VIDEO OUT VIDEO OUT VIDEO IN VIDEO IN VIDEO IN VIDEO IN VIDEO OUT VIDEO DVD MONITOR REC OUT PLAY IN PLAY IN PLAY IN VIDEO 1 VIDEO 2
  • Kenwood 6070 | Instruction Manual - Page 12
    To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D). Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver. Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks
  • Kenwood 6070 | Instruction Manual - Page 13
    Setting up the system Connecting video components (COMPONENT VIDEO) If you have connected the receiver to a video component with COMPONENT jacks, you can get a better picture quality than by connecting to the S VIDEO jacks. VIDEO 3 IN DVD IN Y COMPONENT VIDEO
  • Kenwood 6070 | Instruction Manual - Page 14
    Setting up the system Connecting a DVD player (6-channel input) If you have connected a DVD player to the receiver with digital connection, be sure to read the "Input mode settings" section carefully. 9 OUT VIDEO IN VIDEO IN VIDEO IN VIDEO IN VIDEO OUT VIDEO
  • Kenwood 6070 | Instruction Manual - Page 15
    Setting up the system Connecting the speakers Surround Speakers (Be sure to connect both surround speakers) Right Left Surround Back/Subwoofer Use this terminal it you wish to connect to a Surround Back speaker with the SETUP of "6ch AMP SB" or to connect to a Subwoofer speaker with the SETUP of
  • Kenwood 6070 | Instruction Manual - Page 16
    on the rear panel of the receiver, connect speakers with matching impedance . This speaker stabilizes the sound image and helps recreate sound motion. Required for surround AM 10kHz AM 9kHz FM100kHz FM50kHz DE-EMPHASIS CHANNEL SPACE DE-EMPHASIS CHANNEL SPACE Turn the power OFF by pressing the
  • Kenwood 6070 | Instruction Manual - Page 17
    B). ROOM B OUT CENTER L R ROOM B FRONT SURROUND SURROUND BACK PRE OUT SUB WOOFER Front speakers (Room B) Power amplifier L R Monitor TV (Room B) ROOM A (Main System) ROOM B IR RECEIVER 17 EN
  • Kenwood 6070 | Instruction Manual - Page 18
    Setting up the system PRE OUT connections This receiver has additional preout jacks. These can be Front speakers Power amplifier LR • Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker. • To use the PRE OUT jacks, press only the SPEAKERS A key to the
  • Kenwood 6070 | Instruction Manual - Page 19
    . KENWOOD components (except DVD player): System control Other components: (Registering setup codes) IR REPEATER ¡ q Monitor TV (For IR Transmitter, select "RF REMOTE OFF" only ) IR RECEIVER (IR-9991-sold separately) MONITOR IR repeaters AC adapter To AC wall outlet IR OUT is free IR IN
  • Kenwood 6070 | Instruction Manual - Page 20
    antenna is for use indoors. Place it as far as possible from the receiver, TV set, speaker cords and power cord, and adjust the direction for digital camera, AUDIO OUT or portable MD player ANTENNA AM GND 75 FM • To select the source connected to the AV AUX jacks and press AV AUX key. § •
  • Kenwood 6070 | Instruction Manual - Page 21
    KENWOOD. It may cause a malfunction and damage your equipment. 3. Be sure the system control plugs are inserted all the way in to the system control terminals. SYSTEM CONTROL OPERATIONS Remote Control Lets you operate this unit with the system remote supplied with the receiver. Automatic Operation
  • Kenwood 6070 | Instruction Manual - Page 22
    AA-size (R6) batteries as indicated by the polarity markings. RF remote control function (For VR-6070 only) The remote control has the RF remote function in addition to the IR remote function. The VR-6070 can receive the remote control commands even when they are installed in a position where the IR
  • Kenwood 6070 | Instruction Manual - Page 23
    (MULTI CONTROL 5 / ∞, DOWN 2 / UP3) 1 Turn on the power to this receiver by pressing the POWER ON/STANDBY (for VR-6070) or POWER ON/OFF and ON/ STANDBY (for KRF-X9060D) key or POWER key. 2 Press the SETUP key to enter the SETUP mode. The Surround Back and Subwoofer speaker output selections are
  • Kenwood 6070 | Instruction Manual - Page 24
    Preparing for surround sound 8 Use the MULTI CONTROL knob or Joystick (5/∞) to select the appropriate surround speaker setting. If you selected "LARGE" as the center speaker setting, 1 SURR LARGE : Large surround speakers are con- nected to the receiver. 2 SURR NML/THX : Average size surround
  • Kenwood 6070 | Instruction Manual - Page 25
    sound is heard from the subwoofer or front speaker. SW LFE SP MUTE OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 THX (meters) 3 Use the M/? keys or Joystick (2/3) to select the speakers and the MULTI CONTROL knob or Joystick (5/∞) to adjust the distance to the front
  • Kenwood 6070 | Instruction Manual - Page 26
    VOLUME CONTROL Input Selector AV AUX POWER ON/OFF MD/TAPE (KRF-X9060D) Turning on the receiver 1 Turn on the power to the related components. 2 Turn on the power to this receiver by pressing the POWER ON/ STANDBY (for VR-6070) or POWER ON/OFF and ON/STANDBY (for KRF-X9060D) key. Selecting the
  • Kenwood 6070 | Instruction Manual - Page 27
    seconds. Once-touch low frequency emphasis (BASS BOOST) (remote control only) You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo modes and when "THX OFF". Press the BASS BOOST key. • Press the key once to select the maximum (+10) low frequency emphasis setting
  • Kenwood 6070 | Instruction Manual - Page 28
    sound effect. Press the SPEAKER EQ key to switch the following setting; 1 SPEAKER EQ SMALL : To select will not be available when REC MODE, AUTO TUNING or PRESET MEMORY is ON, and during 96kHz LPCM playback. Listening with headphones 1 CONTROL knob or VOLUME +/- keys to adjust the volume. 28 EN
  • Kenwood 6070 | Instruction Manual - Page 29
    are ready for recording. 3 MANUAL REC mode : The input signal type at the moment this mode is selected is held throughout this mode. SP MUTE OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 THX L ACTIVE EQ. MATRIX C SW R A B CLIP COAXIAL ANALOG 96kHzfs DSP MODE
  • Kenwood 6070 | Instruction Manual - Page 30
    using the following operations to manually store AM stations and other FM stations, and RDS stations. See "Presetting RDS stations (RDS AUTO MEMORY)". (For the U.K. only) ¤ MULTI CONTROL TUNER MEMORY 1 Tune to the station you want to store. 2 Press the MEMORY key while receiving the station
  • Kenwood 6070 | Instruction Manual - Page 31
    broadcasts Proceed to step 3 within 5 seconds. (If more than 5 seconds elapse, press the MEMORY key again). 3 Use the MULTI CONTROL knob or Joystick (5/∞) to select one of the station presets (1 - 40). 4 Press the MEMORY key again to confirm the setting. • Repeat steps 1, 2, 3, and 4 to store as
  • Kenwood 6070 | Instruction Manual - Page 32
    type of program (genre) you want to listen to. Under certain receiving conditions, it may take more than 1 minute to complete the search. PTY TUNING 1/¡ Joystick (MULTI CONTROL 5 / ∞, DOWN 2 / UP3) Preparations • Execute the RDS auto memory procedure. • Set the broadcast band to FM. • Tune to an
  • Kenwood 6070 | Instruction Manual - Page 33
    manually. Note Although a full set of speakers (front left, right, and center, surround left and right, surround back left and right, and a subwoofer) is required for true 6.1 channel Dolby Digital surround EX sound, this receiver rear; the "Center Width" control allows various adjustment of the
  • Kenwood 6070 | Instruction Manual - Page 34
    the rear soundstage.The DTS-ES receiver will be required, to experience a discrete 6.1-channel mix. The DTS-ES decoders used in home cinema systems have decoding options for utilizing the extra channel, in addition to processing existing 5.1 channel surround sound : DTS-ES Discrete 6.1 and DTS-ES
  • Kenwood 6070 | Instruction Manual - Page 35
    source. You already enjoy listening to Dolby Digital sound/DTS multi-channel sound with your multi-speakers. Now you can listen to audio CDs, MDs, Broadcast and Home Theater using your multi-speakers. You will discover a new type of sound through SRS Circle Surround II. The CS system dramatically
  • Kenwood 6070 | Instruction Manual - Page 36
    models channel sound from the stereo source. THX DSP INPUT MODE Input Selector INPUT MODE LISTEN MODE THX full auto ("AUTO DETECT" lights), the receiver selects the optimal listening mode automatically based on JAZZ CLUB mode. 3 THEATER : DSP surround THEATER mode. 4 STADIUM : DSP surround STADIUM mode.
  • Kenwood 6070 | Instruction Manual - Page 37
    This mode creates a home theater environment which is able to reproduce a cinema surround sound system featuring improved special representation and acoustic imaging of surround channels by translating THX Surround EX technology. Press the THX key to switch the following setting : 1 THX Sur EX ON
  • Kenwood 6070 | Instruction Manual - Page 38
    mode compresses the dynamic range of previously specified parts of the Dolby Digital sound track (like scenes with sudden increases in MULTI CONTROL knob or Joystick (5/∞) to select the ON or OFF setting. SP MUTE OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 THX L
  • Kenwood 6070 | Instruction Manual - Page 39
    OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 THX L ACTIVE EQ. MATRIX C SW R A B CLIP COAXIAL ANALOG 96kHzfs the SOUND key, then press the M/? keys or Joystick (2/3) until "CSII GAIN" appears on the display. 2 Use the MULTI CONTROL knob or Joystick (5/∞) to select the
  • Kenwood 6070 | Instruction Manual - Page 40
    II mode only) TruBass adjustment provides deep, rich bass sound to various speakers. 1 Press the SOUND key, then press the M/? keys or Joystick (2/3) until "TruBass" appears. 2 Use the MULTI CONTROL knob or Joystick (5/∞) to select the following; 1 TruBass OFF 2 TruBass SW 3 TruBass LR 4 TruBass
  • Kenwood 6070 | Instruction Manual - Page 41
    manufactured by KENWOOD. • If you push an invalid key, the remote control will display "ERROR" and exit the setup mode. Note Although each setup code is designed to work with a number of different models, certain codes may not work with some models. (Also, certain codes may only operate some of
  • Kenwood 6070 | Instruction Manual - Page 42
    point the remote control at the remote sensor on the receiver when you want to operate KENWOOD components connected by system control cords. Otherwise, point the remote control at the component you want to operate. Storing the remote control code of the other components The remote control unit can
  • Kenwood 6070 | Instruction Manual - Page 43
    Basic remote control operations for other components Setup code chart (RC-R0813) (VR-6070) and (RC-R0814)(KRF-X9060D) TV Setup codes Maker AKAI SONY SYNPHO TEKNICA TOSHIBA ZENITH DVD player Setup codes Maker HITACHI JVC KENWOOD MITSUBISHI ONKYO PANASONIC PHILIPS PIONEER PROSCAN RCA SAMSUNG SONY
  • Kenwood 6070 | Instruction Manual - Page 44
    Basic remote control operations for other components Setup code chart (RC-R0815) (KRF-X9060D) (For the U.K. only) TV Setup codes Maker AKAI BLAUPUNKT FENNER FISHER GRUNDIG HITACHI INNO-HIT IRRADIO JVC LOEWE MAGNAVOX MIVER NOKIA NORDMENDE OKANO ORION PANASONIC PHILIPS SABA SAMSUNG SANYO SCHNEIDER
  • Kenwood 6070 | Instruction Manual - Page 45
    to KENWOOD cassette deck, CD player or MD recorder equipped with system control operations. ¡ Cassette deck operations keys CD player operation keys 1 (Rewind) ¡ (Fast Forward) A/B (Cassette deck selection) SOURCE POWER LEARN DVD CBL DSS/SAT REMOTE MODE VCR TV OTHERS RECEIVER THK
  • Kenwood 6070 | Instruction Manual - Page 46
    operations of KENWOOD and other manufacturers' components which the setup code for each component had been entered beforehand. er TV operation keys Numeric keys VOL + / - (Volume + / -) CH + / - (Channel + / -) ENTER SOURCE POWER LEARN DVD CBL DSS/SAT REMOTE MODE VCR TV OTHERS RECEIVER
  • Kenwood 6070 | Instruction Manual - Page 47
    remote control operations for other components DSS/SAT (or CBL / SAT) receiver operation keys SOURCE (Source power) Numeric keys CH + / - (Channel + / -) ENTER SOURCE POWER LEARN DVD CBL DSS/SAT REMOTE MODE VCR TV OTHERS RECEIVER operation keys SOURCE (Source power) Numeric keys (Select
  • Kenwood 6070 | Instruction Manual - Page 48
    to its normal operating condition. • Please note that resetting the microcomputer will clear the contents of the memory and returns the unit problem, depending on the type of DVD player used. • Set the input mode to digital manual before starting playback of the Dolby Digital source. 9 No sound
  • Kenwood 6070 | Instruction Manual - Page 49
    of difficulty Remote control unit Symptom Certain inputs cannot be selected using the remote control. Remote control operation is not possible. Cause Remedy • No setup codes registered for the respective • Register a setup code at the respective input(s). input(s). er • The remote control is
  • Kenwood 6070 | Instruction Manual - Page 50
    VR-6070) Rated power output during STEREO operation 100 watts per channel minimum RMS, both channels driven, at 8 Ω from 20 Hz to 20 kHz with no more than 0.09% total harmonic distortion. (FTC) Effective power output during SURROUND operation dB Loudness control VOLUME Selectivity (±400 kHz) (VR-6070
  • Kenwood 6070 | Instruction Manual - Page 51
    operation DIN/IEC (20 Hz ~ 20 kHz, 0.09% T.H.D. at 6 100 W + 100 W Effective power output during SURROUND operation FRONT (20 Hz ~ 20 kHz, 0.09% T.H.D. at 6 Ω one channel (SUBWOOFER 1 V / 500 Ω Tone control BASS 10 dB (at 100 Hz) kHz 36 dB Selectivity (±300 kHz 64 Notes 1. KENWOOD follows a
  • Kenwood 6070 | Instruction Manual - Page 52
    52 EN For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model Serial Number
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
AUDIO VIDEO SURROUND RECEIVER
VR
-
6070
KRF
-
X9060D
INSTRUCTION MANUAL
KENWOOD CORPORATION
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this receiver has several
operation modes. These modes enable the remote control to control other audio/video components. In
order to effectively use the remote control it is important to read the operating instructions and obtain
a proper understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation
modes may result in incorrect operations.
This instruction manual is for some models. Model availability and features
(functions) may differ depending on the country and sales area.
B60-5183-00 01
MA
(K, P, T, M, Y, X)
0110