Kenwood 6070 Instruction Manual - Page 51

Specifications For the U.K. only AUDIO section (KRF-X9060D) Rated power output during STEREO operation DIN/IEC (20 Hz ~ 20 kHz, 0.09% T.H.D. at 6 100 W + 100 W Effective power output during SURROUND operation FRONT (20 Hz ~ 20 kHz, 0.09% T.H.D. at 6 Ω one channel driven 100 W + 100 W CENTER (20 Hz ~ 20 kHz, 0.09% T.H.D. at 6 Ω one channel driven 100 W SURROUND (20 Hz ~ 20 kHz, 0.7% T.H.D. at 6 Ω one channel driven 100 W + 100 W SURROUND BACK/SUBWOOFER (20 Hz ~ 20 kHz, 0.09% T.H.D. at 6 Ω one channel driven 100 W Total harmonic distortion 0.009% (1 kHz, 50 W, 6 Ω) Frequency response Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH 10 Hz ~ 100 kHz, +0 dB ~ -3.0 dB PHONO 'RIAA' response 40 Hz ~ 20 kHz, +1.5 dB ~ -3.0 dB Maximum input level PHONO (MM 45 mV, 1% T.H.D. at 1 kHz Signal to noise ratio (IHF'66) PHONO (MM 75 dB Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH 95 dB Loudness control VOLUME at -30 dB level 6 dB (100 Hz) Input sensitivity / impedance PHONO (MM 4.0 mV / 47 kΩ Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH 320 mV / 47 kΩ Output level / impedance TAPE REC 320 mV / 1 kΩ PRE OUT (FRONT,CENTER,SURROUND 1 V / 500 Ω PRE OUT (SURROUND BACK 1 V / 500 Ω PRE OUT (SUBWOOFER 1 V / 500 Ω Tone control BASS 10 dB (at 100 Hz) TREBLE 10 dB (at 10 kHz) DIGITAL AUDIO section Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 96 kHz Input level / impedance / wave length Optical 15 dBm ~ -24 dBm), 660 nm ±30 nm Coaxial 0.5 Vp-p / 75 Ω Output level / impedance / wave length Optical 21 dBm ~ -15 dBm), 660 nm ±30 nm VIDEO section VIDEO inputs / outputs VIDEO (composite 1 Vp-p / 75 Ω S VIDEO inputs /outputs S VIDEO (luminance signal 1 Vp-p / 75 Ω S VIDEO (chrominance signal 0.286 Vp-p / 75 Ω COMPONENT VIDEO inputs /outputs COMPONENT VIDEO (luminance signal 1 Vp-p / 75 Ω COMPONENT VIDEO (CB/CR-signal 0.32 Vp-p / 75 Ω FM tuner section Tuning frequency range 87.5 MHz ~ 108 MHz Usable sensitivity MONO 1.3 µV (75 Ω)/ 13.2 dBf (40 kHz dev, S/N 26 dB) STEREO .... 45 µV (75 Ω)/ 42.1 dBf (40 + 6 kHz dev, S/N 46 dB) Total harmonic distortion MONO (1 kHz, 40 kHz dev 0.2% (65.2 dBf input) STEREO (1 kHz, 40 + 6 kHz dev 0.8% (65.2 dBf input) Signal to noise ratio (DIN weighted at 1 kHz) MONO 65 dB (65.2 dBf input) STEREO 60 dB (65.2 dBf input) Stereo separation (1 kHz 36 dB Selectivity (±300 kHz 64 dB Frequency response (30 Hz ~ 15 kHz 0.5 dB, -3.0 dB MW tuner section Tuning frequency range 531 kHz ~ 1,602 kHz Usable sensitivity (30% mod, S/N 20 dB) ......... 16 µV / (600 µV/m) Signal to noise ratio (400 Hz, 30% mod) 50 dB (60 dBµ VEMF input) GENERAL Power consumption 330 W AC outlet SWITCHED total 90 W max.) Dimensions W : 440 mm (17-5/16") H : 159 mm (6-1/4") D : 392 mm (15-7/16") Weight (Net 9.8 kg (21.6 lb) Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature). 51 EN