Kenwood 6070 Instruction Manual - Page 19
Connecting the RF antenna and external IR Repeater, Connecting IR repeater - vr remote codes
View all Kenwood 6070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Setting up the system Connecting the RF antenna and external IR Repeater (For VR-6070 only) The remote control for this receiver has the RF (radio frequency) and IR (infrared rays) transmission function. IR repeaters enables you to control components located in cabinets or behind glass doors. You can enjoy a wider remote control signal range by placing the RF antenna and IR repeater away from the receiver. KENWOOD components (except DVD player): System control Other components: (Registering setup codes) IR REPEATER ¡ q Monitor TV (For IR Transmitter, select "RF REMOTE OFF" only ) IR RECEIVER (IR-9991-sold separately) MONITOR IR repeaters AC adapter To AC wall outlet IR OUT is free IR IN IR RECEIVER IN IR REPEATER OUT RF antenna (For RF Transmitter, select either 1. RF REMOTE Band 1, or 2. RF REMOTE Band 2) RF REMOTE ANTENNA Connecting IR repeater 1 Connect the IR repeater to the device as described in the repeater's manual. 2 Connect the IR repeater cable(s) to the IR REPEATER OUT jack(s). Notes • IR repeaters send a signal similar to the device's own remote control. Xantech repeaters (models 282-00, 286-00, or 283-00) are compatible with your new audio-video receiver. Connecting the RF remote antenna 1 Insert the jack of the provided RF remote antenna into the RF REMOTE ANTENNA jack. 2 Place the antenna wire vertically and fix it. • Place the antenna away from the metallic panel. Shape of plug to be connected. IR RECEIVER IN IR REPEATER OUT Stereo mini plug Sleeve Tip Mono mini plug Sleeve Tip Ring IR IN / OUT SPECIFICATION: Terminal IR RECEIVER IN To Tip To Ring To Sleeve Signal Ground + 8V IR REPEATER OUT Signal Ground 19 EN