Kenwood 6070 Instruction Manual - Page 40

Ambience effects TruBass adjustment mode (CS II mode only) TruBass adjustment provides deep, rich bass sound to various speakers. 1 Press the SOUND key, then press the M/? keys or Joystick (2/3) until "TruBass" appears. 2 Use the MULTI CONTROL knob or Joystick (5/∞) to select the following; 1 TruBass OFF 2 TruBass SW 3 TruBass LR 4 TruBass SW + LR • After selecting 2, 3 or 4, TruBass speaker size and level adjustment selection will be available. 3 For TruBass speaker selection, use the MULTI CONTROL knob or Joystick (5/∞) to select any of the following display; 1 TruBass LARGE 2 TruBass MID 3 TruBass SMALL 4 Use the MULTI CONTROL knob or Joystick (5/∞) to adjust the TruBass Level. • The adjustment range is from 0 (TruBass OFF) to 10. SP MUTE OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 THX RDS L ACTIVE EQ. MATRIX C SW R A B CLIP COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII Surround EX RTY AUTO LFE MEMO STEREO SL SB SR TUNED Display dimmer adjustment The dimmer function lets you select the brightness of the receiver's display. You might find this useful if you darken your room to watch movies or listen to music. Each time you press the DIMMER key, the display's brightness changes among the three available settings. Select the brightness level you find most pleasing. 1 Bright 2 Medium 3 Dark 96kHz LPCM playback The receiver is compatible with the 96kHz LPCM playback. To play a 96kHz DVD, set the listen mode to "STEREO". • In FULL AUTO input mode, the listen mode will automatically be STEREO. • When in DIGITAL MANUAL input mode (listen mode is not STEREO), "FS 96kHz" will appear in the display and no sound can be heard from the speakers. Press the LISTEN MODE key (the listen mode changes to the STEREO mode) to output sound from the speakers. 40 EN