Kenwood 6070 Instruction Manual - Page 12

Setting up the system Digital connections The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD) format digital signals. If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section carefully. 9 COAXIAL VIDEO 2 OPTICAL OPTICAL OPTICAL CD/DVD VIDEO 3 MONITOR DVD/ 6CH DIGITAL IN DIGITAL OUT OPTICAL DIGITAL IN (AUDIO) Optical fiber cable MD player COAXIAL DIGITAL OUT (AUDIO) RF digital demodulator (DEM-9991D) (sold separately) Optical fiber cable Optical fiber cable OPTICAL DIGITAL OUT (AUDIO) Component with DTS, Dolby Digital, or PCM OPTICAL DIGITAL OUT Connect the video signal and digital audio signals to the VIDEO 3 jacks. (See "Connecting video components".) ! OPTICAL DIGITAL OUT (AUDIO) CD or DVD player COAXIAL DIGITAL OUT (AUDIO) Component with DTS, Dolby Digital, or PCM COAXIAL DIGITAL OUT Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See "Connecting video components".) ! DOLBY DIGITAL RF OUT (AUDIO) PCM OUT LD player To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D). Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver. Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See "Connecting video components".) 12 EN