Kenwood 6070 Instruction Manual - Page 41

Basic remote control operations for other components The remote control supplied with this receiver is also capable of controlling components from a variety of manufacturers once you register the appropriate setup codes into the remote control unit. Low battery warning Replace all two batteries with new ones when you notice a shortening of the distance from which the remote control will operate. The remote control is designed to retain setup codes in memory while you change batteries. Registering setup codes for other components REMOTE MODE SOURCE Numeric keys INPUT SELECTOR 1 Find the setup code of the component to be registered. • Refer to the setup code lists to find the setup code for the component to be registered. er Example: To register a DVD made by KENWOOD, you would enter "805". Input (DVD) Component Maker DVD player KENWOOD Code 805, 808 Key DVD 2 The OTHERS key enables you to operate another DVD, CD, CBL, DSS/SAT, CBL/SAT, VCR or TV component. For OTHERS key; Hold down the OTHERS key and press the numeric keys to enter the setup code. • Example: After you have registered the KENWOOD DVD player, press "804" to register another DVD player which is manufactured by Panasonic. • If you push an invalid key, the remote control will display "ERROR" and exit the setup mode. 3Press any of the REMOTE MODE key and then press the SOURCE key to check that the component you want to control turns on. If the component does not react, and there is more than one setup code, enter another setup code and try again. • If the component is already on, pressing the SOURCE key will turn it off. 4Repeat steps 2 to 3 to register additional components until all components have been registered. Alternative REMOTE MODE key . This operation is optional and is convenient when you link an INPUT SELECTOR key to the REMOTE MODE key. While operating one component, the INPUT SELECTOR key functions as an alternative REMOTE MODE key to select another component. • Example: REMOTE MODE (DVD) key can be linked to the INPUT SELECTOR (VIDEO 1) key as described below; 1 After registering the setup code, press and hold the SOURCE key and then press the REMOTE MODE (DVD) key. 2 While holding down the SOURCE , press the INPUT SELECTOR (VIDEO 1) key. • Now the VIDEO 1 key will function as a DVD key which can be selected at the same time while operating a CD player. • Repeat step 1 to 2 to link other INPUT SELECTOR keys. 2Registering components for REMOTE MODE [(DVD, CBL, DSS/SAT, VCR, TV, OTHERS - RC-R0813/R0814) or (DVD, CD, CBL/SAT, VCR, TV, OTHERS - RC-R0815)] keys. 1 For DVD, CD, CBL, DSS/SAT, CBL/SAT, VCR or TV keys; Hold down the SOURCE key and press the numeric keys to enter the setup code. • Example: Press "805" to register a DVD player manufactured by KENWOOD. • If you push an invalid key, the remote control will display "ERROR" and exit the setup mode. Note Although each setup code is designed to work with a number of different models, certain codes may not work with some models. (Also, certain codes may only operate some of the functions available on a given model.) 41 EN