Kenwood 6070 Instruction Manual - Page 29

Recording, Recording audio analog sources, Recording video - manual

Page 29 highlights

Recording Recording audio (analog sources) MD/TAPE Recording a music source 1 Use the Input selector keys to select the source (other than "MD/ TAPE") you want to record. 2 Set the MD or TAPE recorder to record. 3 Start playback, then start recording. Recording video 1 Use the Input selector keys to select the video source (other than "VIDEO 1") you want to record. 2 Set the video deck connected to VIDEO 1 to record. • Select the REC MODE to record a digital input source. 3 Start playback, then start recording. • Recording may not be normal for some video software. This is due to the copy guard condition. i Recording audio (digital sources) Switch on the REC MODE to record a digital input source. Usually use the AUTO REC MODE to record audio input sources. When the digital mode changes during recording in the AUTO REC MODE, the audio input source may be interrupted momentarily. Recording music in AUTO REC or MANUAL REC mode DIMMER 3 Press and hold the DIMMER key for more than 2 seconds to select the AUTO REC or MANUAL REC mode. 1 REC mode off : The digital input record mode is switched off. 2 AUTO REC mode : The digital input signals (DTS, Dolby Digital, or PCM) are identified automatically and converted into stereo signals that are ready for recording. 3 MANUAL REC mode : The input signal type at the moment this mode is selected is held throughout this mode. For AUTO REC mode : SP MUTE OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 THX L ACTIVE EQ. MATRIX C SW R A B CLIP COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII Surround EX LFE SL S SB SR RDS RTY AUTO MEMO STEREO TUNED ↓ SP MUTE OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 THX L ACTIVE EQ. MATRIX C SW R A B CLIP COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII Surround EX LFE SL S SB SR RDS RTY AUTO MEMO STEREO TUNED For MANUAL REC mode : SP MUTE OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 THX L ACTIVE EQ. MATRIX C SW R A B CLIP COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII Surround EX LFE SL S SB SR RDS RTY AUTO MEMO STEREO TUNED ↓ SP MUTE OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 THX L ACTIVE EQ. MATRIX C SW R A B CLIP COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII Surround EX LFE SL S SB SR RDS RTY AUTO MEMO STEREO TUNED 4 Start playback, then start recording. • If the audio reproduction stops in the middle due to change in the input signals, etc., press the DIMMER key. Input Selector 1 Use the Input Selector keys to select the source (CD/DVD, DVD/ 6CH, VIDEO 2, VIDEO 3) you want to record. 2 Set the MD or TAPE recorder to record. 29 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

29
EN
Recording audio (analog sources)
MD/TAPE
Recording a music source
1
Use the Input selector keys to select the source (other than
MD/
TAPE
) you want to record.
2
Set the MD or TAPE recorder to record.
3
Start playback, then start recording.
Recording video
1
Use the Input selector keys to select the video source (other than
VIDEO 1
) you want to record.
2
Set the video deck connected to VIDEO 1 to record.
Select the REC MODE to record a digital input source.
3
Start playback, then start recording.
Recording may not be normal for some video software. This is due
to the copy guard condition.
i
Recording audio (digital sources)
Switch on the
REC MODE
to record a digital input source.
Usually use the
AUTO REC MODE
to record audio input sources. When
the digital mode changes during recording in the
AUTO REC MODE
, the
audio input source may be interrupted momentarily.
Recording music in AUTO REC or MANUAL REC mode
Input Selector
DIMMER
1
Use the Input Selector keys to select the source (CD/DVD, DVD/
6CH, VIDEO 2, VIDEO 3) you want to record.
2
Set the MD or TAPE recorder to record.
Recording
3
Press and hold the DIMMER key for more than 2 seconds to select
the AUTO REC or MANUAL REC mode.
1
REC mode off
:
The digital input record mode is
switched off.
2
AUTO REC mode
:
The digital input signals (DTS, Dolby
Digital, or PCM) are identified
automatically and converted into
stereo signals that are ready for
recording.
3
MANUAL REC mode
:
The input signal type at the moment
this mode is selected is held
throughout this mode.
For AUTO REC mode :
L
S
SB
SL
SR
C
R
SP
MUTE
OPTICAL
6CH INPUT
COAXIAL
ANALOG
96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A
B
CLIP
AUTO DETECT
THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
LFE
SW
L
S
SB
C
R
SP
MUTE
OPTICAL
6CH INPUT
COAXIAL
ANALOG
96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A
B
CLIP
AUTO DETECT
THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
LFE
SL
SR
SW
For MANUAL REC mode :
L
SL
S
SB
SR
C
R
SW
LFE
SP
MUTE
OPTICAL
6CH INPUT
COAXIAL
ANALOG
96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A
B
CLIP
AUTO DETECT
THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
L
SL
S
SB
SR
C
R
SW
LFE
SP
MUTE
OPTICAL
6CH INPUT
COAXIAL
ANALOG
96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A
B
CLIP
AUTO DETECT
THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
4
Start playback, then start recording.
If the audio reproduction stops in the middle due to change in the
input signals, etc., press the
DIMMER
key.