Kenwood DDX9703S User Manual - Page 80

CONNECTION/INSTALLATION ❏ Connecting wires to terminals for Toyota Cars (for DDX916WSL) * When using Antenna Control, connect the ANT CONT lead (blue) to A5 (blue) on the wiring harness. Page 83 VIDEO OUT REAR VIEW CAMERA FRONT VIEW CAMERA Pages 81 - 83 Page 83 Page 83 Connect GPS antenna (7). (Page 84) Page 83 Page 83 AV-IN Connect the antenna cord to the antenna terminal. 15 A fuse 1 Connect the USB extension cable (6). (Page 81) Connect a navigation box. (Page 83) Steering Remote 0 If no connections are made, do not let the cable come out from the tab. Connector D % % % Connect to the vehicle's steering remote harness. • Depending on the type of vehicle, it cannot be connected. Connect to the vehicle's parking brake detection switch harness. • For best safety, be sure to connect the parking sensor. Light green (Parking sensor wire) Purple with white stripe (Reverse sensor wire) REVERSE PRK SW Connect to the vehicle's reverse lamp harness when using the optional rear view camera. Blue with white stripe (Power control wire) P.CONT Connector B When using the optional power amplifier, connect to its power control terminal. Connect to the vehicle's harness. * ANT CONT 9 Connector A Connect to the vehicle's harness. Connector C Connect to the vehicle's harness. • Depending on the type of vehicle, it cannot be $ connected. In this case, connect the JASO plug directly to the unit. Pin Color and functions of Connector A, B, C and D A1 Orange/White Dimmer A2 Yellow Battery A3 Blue Antenna control A4 Red Ignition (ACC) A5 Blue Antenna control A6 Black Ground connection A8/A7 White ª / White/Black · Left speaker (front) A10/A9 Gray ª / Gray/Black · Right speaker (front) B2/B1 Green ª / Green/Black · Left speaker (rear) B6/B5 Purple ª / Purple/Black · Right speaker (rear) C5 Blue Antenna control D21 Light green/Red Input 1 D22 Purple/Red Input 2 D23 Gray/Red Ground 80