Kenwood DDX9703S User Manual - Page 83

CONNECTION/INSTALLATION ❏ Connecting the Wireless Display Adapter to use smartphone/iPod/ iPhone over a wireless connection Wireless Display Adapter: KCA-WL100 (optional accessory) ❏ Connecting external components VIDEO OUT REAR VIEW CAMERA FRONT VIEW CAMERA DDX9903S/DDX9703S/ DDX6903S/DDX6703S/ DDX9716BTS DDX916WSL AV-IN 1 HDMI/MHL input*1 2 Video output (Yellow) 3 Rear view camera input (Yellow) 4 Front view camera input (Yellow) 5 Audio Video input (AV-IN1)*2 6 Audio Video input • For DDX9903S/DDX9703S/DDX6903S/ DDX6703S/DDX9716BTS: AV-IN • For DDX916WSL: AV-IN2 7 AV-OUT/Audio output (ø3.5 mini jack) Resistance-free stereo type mini plug 8 Front preout*3 • Audio left output (White) • Audio right output (Red) 9 Subwoofer preout (monaural output)*3 • Subwoofer left output (White) • Subwoofer right output (Red) p Rear preout*3 • Audio left output (White) • Audio right output (Red) q iDatalink input for connecting ADS adapter (commercially available)*5 w TV tuner remote control output*4 e Steering wheel remote controller input*4 • Connect to the vehicle's steering remote harness using the Steering Remote cable (0). Contact your Kenwood dealer for details. r NAV I/F input*4 t Expansion port for connecting SiriusXM Connect Vehicle Tuner (commercially available)*5 *1 Only for DDX9903S/DDX9703S/DDX9716BTS/DDX916WSL. *2 Only for DDX916WSL. *3 When connecting an external amplifier, connect its ground wire to the chassis of the car; otherwise the unit may be damaged. *4 Only for DDX9716BTS/DDX916WSL. *5 Only for DDX9903S/DDX9703S/DDX6903S/DDX6703S. ❏ Connecting microphone for Bluetooth Connect the microphone (-) to the MIC terminal. • To install the microphone, peel off the adhesive tape, fix it on the installation position, then adjust the direction of the microphone to face the driver. After installing, fix the microphone cable to the car with clamps (commercially available). - Clean the installation surface beforehand. - ENGLISH 83