Kenwood DDX9703S User Manual - Page 92

REFERENCES Echo or noise occurs. • Adjust the microphone unit position. • Adjust the echo volume or noise reduction volume. (Page 54) The unit does not respond when you try to copy the phone book to the unit. • You may have tried to copy the same entries (as stored) to the unit. Specifications ❏ Monitor section Picture Size (W × H) DDX9903S/DDX9703S/DDX9716BTS/DDX916WSL: 6.95 inches (diagonal) wide 156.6 mm × 81.6 mm (6-3/16" × 3-3/16") DDX6903S/DDX6703S: 6.2 inches (diagonal) wide 137.5 mm × 77.2 mm (5-7/16" × 3-1/16") Display System Transparent TN LCD panel Drive System TFT active matrix system Number of Pixels 1 152 000 (800H × 480V × RGB) Effective Pixels 99.99 % Pixel Arrangement RGB striped arrangement Back Lighting LED ❏ DVD player section D/A Converter 24/32 bit Audio Decoder Linear PCM/Dolby Digital/MP3/ WMA/AAC/WAV/FLAC/Vorbis Video Decoder MPEG1/MPEG2/MPEG4/ WMV/H.264/MKV Wow & Flutter Below Measurable Limit Frequency Response 96 kHz Sampling: 20 Hz to 44 000 Hz 48 kHz Sampling: 20 Hz to 22 000 Hz 44.1 kHz Sampling: 20 Hz to 20 000 Hz Total Harmonic Distortion 0.010 % (1 kHz) Signal to Noise Ratio 98 dB (DVD-Video 96 kHz) Dynamic Range 98 dB (DVD-Video 96 kHz) Disc Format DVD-Video/VIDEO-CD/CD-DA Sampling Frequency 44.1 kHz/48 kHz/96 kHz Quantifying Bit Number 16/20/24 bit ❏ USB interface section USB Standard USB 2.0 High Speed File System FAT 16/32, NTFS Maximum Power Supply Current DDX9903S/DDX6903S/DDX916WSL: DC 5 V 1.5 A × 2 DDX9703S/DDX6703S/DDX9716BTS: DC 5 V 1.5 A × 1 D/A Converter 24/32 bit Audio Decoder MP3/WMA/AAC/WAV/FLAC/ Vorbis Video Decoder MPEG1/MPEG2/MPEG4/ WMV/H.264/MKV ❏ HDMI interface section (Only for DDX9903S/DDX9703S/DDX9716BTS/ DDX916WSL) Connector Type TYPE-A ❏ MHL interface section (Only for DDX9903S/DDX9703S/DDX9716BTS/ DDX916WSL) Supported Version MHL 2 Maximum Power Supply Current DC 5 V 900 mA 92