Konica Minolta Kodak i4600 User Guide - Page 16

Adjusting the input elevator You can adjust the side guides and input elevator height to accommodate your scanning needs. When the scanner is not is use, the input elevator can be folded up against the scanner. NOTE: The input elevator must be in the lowest position before closing it. • Adjusting the side guides - the side guides can be adjusted for rightedge, left-edge or center feeding. The side guides can be moved together for center feeding or independently for offset feeding (right-edge or leftedge). Before moving the side guides, be sure the locking switch is not in the locked position (see below). NOTE: When using the optional Enhanced Printer, documents should be placed in the input elevator in a manner that will align the print string in the proper location. Offset feeding may be required. • Locking the side guides - side guides may be locked into position after they are adjusted. This may be helpful when the placement of a print string is important. To lock the side guides remove any documents from the input elevator and move the lock switch to the left (the locked position). 3-2 A-61651 November 2010