Konica Minolta Kodak i4600 User Guide - Page 29
Changing print positions
View all Konica Minolta Kodak i4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Changing print positions The horizontal print position must be changed manually. 1. Remove the output tray. 2. Open the printer access cover. NOTES: • The horizontal print positions are visible by a small detent on the printer rail. • Printing automatically stops approximately 1.27 cm (½-inch) from the trailing edge of the document, even if the information has not been completely printed. 3. Lift up on the printer carrier and remove it from it's position. 4. Align the slot on the printer carrier with the desired horizontal print position and slide the printer carrier in place. NOTE: The print location indicators at the edge of the input elevator can be used as a guide to verify your horizontal print position. Indicators 5. Close the printer access cover and reinstall the output tray. 4-8 A-61651 November 2010