Konica Minolta Kodak i4600 User Guide - Page 18
Installing the document extender, Adjusting the output tray, Adjusting the angle of the output tray
View all Konica Minolta Kodak i4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installing the document extender • Insert the ends of the document extender into the holes on the input elevator or the output tray and lower the extender into position. Adjusting the output tray The Kodak i4000 Series Scanners are designed with improved stacking performance which allows most users to scan documents without the assistance of the output tray side guides and document stop. With one or both side guides down and the height adjustment tab raised, you can quickly and easily remove the scanned documents from the front-, right- or left-side of the scanner. Try using this method before using the side guides and document stop. NOTE: If you find it more convenient to use the side guides and document stop, see the next section for adjustment procedures. • Adjusting the angle of the output tray - it is strongly recommended that you scan documents with the angle of the output tray in the "up" position to achieve best stacking performance. Just lift the front of the output tray and the height adjustment tab will release from underneath the output tray. To lower the output tray, gently push the height adjustment tab underneath the output tray while lowering the output tray on the printer access cover. 3-4 A-61651 November 2010