Konica Minolta bizhub 3622 bizhub 3622 User Guide - Page 183
Scanner does not respond, Adjusting scanner registration, Settings, Device, Maintenance, Config Menu
View all Konica Minolta bizhub 3622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Troubleshooting 183 Scanner does not respond Action Step 1 a Check if the printer is turned on. b Resolve any error messages that appear on the display. c Copy or scan the document. Yes The problem is solved. Is the scanner responding? Step 2 a Check if the power cord is connected properly to the printer and the electrical outlet. The problem is solved. CAUTION-POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible. b Copy or scan the document. Is the scanner responding? Step 3 The problem is a Turn off the printer, wait for about 10 seconds, and then turn it solved. back on. b Copy or scan the document. Is the scanner responding? No Go to step 2. Go to step 3. Contact customer support. Adjusting scanner registration 1 From the control panel, navigate to: > Settings > > Device > > Maintenance > > > Scanner Manual Registration > > Config Menu > > Scanner Configuration 2 Select Print Quick Test, and then press . 3 Place the Print Quick Test page on the scanner glass, and then select Flatbed Registration. 4 Select Copy Quick Test, and then press . 5 Compare the Copy Quick Test page with the original document. Note: If the margins of the test page are different from the original document, then adjust Left Margin and Top Margin. 6 Repeat step 4 and step 5 until the margins of the Copy Quick Test page closely match the original document.