Konica Minolta bizhub 3622 bizhub 3622 User Guide - Page 71

Understanding the printer menus 71 Menu item Description Enable Manual Fax Off* On Set the printer to fax manually. Notes: • This setting requires a line splitter and a telephone handset. • Use a regular telephone line to answer an incoming fax job and to dial a fax number. • To go directly to the Manual Fax function, touch # and 0 on the keypad. Memory Use All receive Mostly receive Equal* Mostly send All send Set the amount of internal printer memory allocated for faxing. Note: This setting prevents memory buffer conditions and failed faxes. Cancel Faxes Allow* Don't Allow Cancel outgoing faxes before they are transmitted, or cancel incoming faxes before they finish printing. Caller ID Off On* Alternate Show the telephone number of the person sending the fax. Fax Number Masking Off* From Left From Right Specify the format for masking an outgoing fax number. Digits to Mask 0-58 (0*) Specify the number of digits to mask in an outgoing fax number. Enable Line Connected Detection Off On* Determine whether a telephone line is connected to the printer. Note: Detection takes place when turning on the printer and before each call. Enable Line In Wrong Jack Detection Off* On Determine whether a telephone line is connected to the correct port on the printer. Note: Detection takes place when turning on the printer and before each call. Enable Extension in Use Support Off On* Determine whether a telephone line is used by another device such as another phone on the same line. Note: This setting is monitored continuously after turning on the printer. Optimize Fax Compatibility Configure the printer fax functionality for optimal compatibility with other fax machines. Note: An asterisk (*) next to a value indicates the factory default setting.