Konica Minolta bizhub 3622 bizhub 3622 User Guide - Page 45
Changing the fax resolution, Adjusting the fax darkness, Viewing a fax log, Blocking junk faxes, Notes
View all Konica Minolta bizhub 3622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Faxing 45 Changing the fax resolution 1 Load an original document into the ADF tray or on the scanner glass. 2 From the control panel, navigate to: > Fax > > enter the needed information > 3 Adjust the Resolution setting. 4 Fax the document. Adjusting the fax darkness 1 Load an original document into the ADF tray or on the scanner glass. 2 From the control panel, navigate to: > Fax > > enter the needed information > 3 Adjust the Darkness setting. 4 Send the fax job. Viewing a fax log 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Reports > Fax. 3 Click Fax Job Log or Fax Call Log. Blocking junk faxes 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Settings > Fax > Analog Fax Setup > Fax Receive Settings > Admin Controls. 3 Select Block No Name Fax. 4 Apply the changes.