Konica Minolta bizhub 3622 bizhub 3622 User Guide - Page 184

Adjusting ADF registration, Contacting customer support

Page 184 highlights

Troubleshooting 184 Adjusting ADF registration 1 From the control panel, navigate to: > Settings > > Device > > Maintenance > > > Scanner Manual Registration > > Config Menu > > Scanner Configuration 2 Select Print Quick Test, and then press . 3 Place the Print Quick Test page on the ADF tray. 4 Select Front ADF Registration or Rear ADF Registration. Notes: • To align Front ADF Registration, place the test page faceup, short edge first into the ADF. • To align Rear ADF Registration, place the test page facedown, short edge first into the ADF. 5 Select Copy Quick Test, and then press . 6 Compare the Copy Quick Test page with the original document. Note: If the margins of the test page are different from the original document, then adjust Horizontal Adjust and Top Margin. 7 Repeat step 5 and step 6 until the margins of the Copy Quick Test page closely match the original document. Contacting customer support Before contacting customer support, make sure to have the following information: • Printer problem • Error message • Printer model type and serial number Visit the place where you purchased your printer.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204

Adjusting ADF registration
1
From the control panel, navigate to:
>
Settings
>
>
Device
>
>
Maintenance
>
>
Config Menu
>
>
Scanner Configuration
>
>
Scanner Manual Registration
>
2
Select
Print Quick Test
, and then press
.
3
Place the Print Quick Test page on the ADF tray.
4
Select
Front ADF Registration
or
Rear ADF Registration
.
Notes:
To align Front ADF Registration, place the test page faceup, short edge first into the ADF.
To align Rear ADF Registration, place the test page facedown, short edge first into the ADF.
5
Select
Copy Quick Test
, and then press
.
6
Compare the Copy Quick Test page with the original document.
Note:
If the margins of the test page are different from the original document, then adjust Horizontal
Adjust and Top Margin.
7
Repeat
step 5
and
step 6
until the margins of the Copy Quick Test page closely match the original document.
Contacting customer support
Before contacting customer support, make sure to have the following information:
Printer problem
Error message
Printer model type and serial number
Visit the place where you purchased your printer.
Troubleshooting
184