Konica Minolta bizhub C3110 bizhub C3110 Scan Functions User Guide - Page 50
How to save
View all Konica Minolta bizhub C3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
5.2 How to save 5 5.2 How to save 0 Up to 100 files can be saved. 1 Load the original. 2 Press the Scan key. 3 On the main screen (Scan mode), press the + or , key to configure scan transmission options. % Before scanning the original on this machine, specify the size of the original to be scanned. If you fail to set the original size correctly, the image may be cut off. For details on how to specify the original size, refer to page 1-10. % For details on configuring option settings, refer to the respective columns of the following table. Purpose To configure basic options such as file type and original size To adjust the image quality or density depending on the contents of the original To specify the method to scan the original Reference page 1-10 page 1-11 page 1-13 4 On the main screen (Scan mode), press the + or , key to select [SCAN TO], then press the Select key. 5 Select [Scan to HDD], then press the Select key. 6 Select [Save Document], then press the Select key. % If you select [Delete Document], you can delete files on the hard disk. 7 If you are logged in as a registered user while user authentication is enabled, select [Save Folder], then press the Select key. % If user authentication is not enabled or you are logged in as a public user, go to Step 9. 8 If necessary, change the storage location, then press the Select key. % If you are logged in as a registered user while user authentication is enabled, you can select [Personal] (personal area on the hard disk) as a destination for where to save a file. 9 Select [Document Name], then press the Select key. 10 Check the name of the file to be saved, then press the Start key. % To scan in color, press the Start (Color) key. To scan in black and white, press the Start (B&W) key. % If you press the Stop/Reset key while scanning the original, scan processing stops, and the confir- mation screen appears to check whether you wish to cancel the job. To stop sending, cancel the job. Sending starts. [Scan Functions] 5-3