Konica Minolta bizhub C3110 bizhub C3110 Fax Functions User Guide - Page 17
Checking the recipient status before sending manual transmis
View all Konica Minolta bizhub C3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
3.2 Checking the recipient status before sending (manual transmission) 3 3.2 Checking the recipient status before sending (manual transmission) Manual transmission Manual transmission lets the sender to check the recipient status by communicating with the recipient or checking signal sounds to ensure that the recipient is ready to receive a fax. Use this function to ensure faxes are sent to the receiving machines when they are ready to receive them. Faxing manually 1 Load the original. 2 Press the Fax key. 3 Specify fax transmission options. 4 Press the On hook key. % If you are using a phone, pick up the handset. 5 Check that [TX] is selected. 6 Enter a fax number. % For details on how to specify a destination, refer to page 3-7. % If the pulse is set to the line type, press the key to temporarily switch to tone. 7 When you hear a signal sound, press the Start key. Sending starts. If you are using a phone, replace the handset. % If you press the Stop/Reset key while scanning the original, scan processing stops, and the confir- mation screen appears to check whether you wish to cancel the job. To stop sending, cancel the job. [Fax Functions] 3-6