Konica Minolta bizhub C3110 bizhub C3110 Fax Functions User Guide - Page 31
Releasing the Super G3 mode for sending [V34 OFF]
View all Konica Minolta bizhub C3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
4.8 Releasing the Super G3 mode for sending ([V34 OFF]) 4 4.8 Releasing the Super G3 mode for sending ([V34 OFF]) V34 V34 is a communication mode used for the Super G3 fax communication. This can shorten the communication time and reduce communication costs because a single page of sizeA4 document can be sent within approximately three seconds. This machine uses the V.34 protocol communication by default. You can send faxes with V34 canceled if it is not possible to establish a communication in Super G3 mode depending on telephone line conditions (for example, when the remote or this machine is connected to a PBX line). Tips If the V34 function is canceled, the following functions cannot be used together. ECM OFF, Polling TX, Polling RX Operation flow 1 Load the original. 2 Press the Fax key. 3 Specify the destination. 4 On the main screen (Fax mode), press the + or , key to select [Line Setting], then press the Select key. 5 Select [V34 OFF], then press the Select key. 6 Select [YES], then press the Select key. 7 Press the Start key. Sending starts. [Fax Functions] 4-9