Konica Minolta bizhub C3110 bizhub C3110 Fax Functions User Guide - Page 30

Releasing the ECM mode for sending [ECM OFF]

Get Konica Minolta bizhub C3110 PDF manuals and user guides View all Konica Minolta bizhub C3110 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

4.7 Releasing the ECM mode for sending ([ECM OFF]) 4 4.7 Releasing the ECM mode for sending ([ECM OFF]) ECM ECM (Error Correction Mode) is an error correction mode defined by ITU-T (International Telecommunication Union - Telecommunication Standardization Sector). Fax machines that support the ECM communicate, while confirming that there is no error in the sent data. This prevents image blurring caused by noise on the phone line. By default, this machine uses ECM for transmission. If the noise level is high, the communication may take a little longer than communication that does not involve ECM checking. To reduce the transmission time, you can transmit faxes with ECM turned off. However, an image error or communication errors may occur depending on the specified communication time value, so change the value to suit conditions. Tips If the ECM function is canceled, the following functions cannot be used together. V34 OFF, Polling TX, Polling RX Operation flow 1 Load the original. 2 Press the Fax key. 3 Specify the destination. 4 On the main screen (Fax mode), press the + or , key to select [Line Setting], then press the Select key. 5 Select [ECM OFF], then press the Select key. 6 Select [YES], then press the Select key. 7 Press the Start key. Sending starts. [Fax Functions] 4-8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
[Fax Functions]
4-8
4.7
Releasing the ECM mode for sending ([ECM OFF])
4
4.7
Releasing the ECM mode for sending ([ECM OFF])
ECM
ECM (Error Correction Mode) is an error correction mode defined by ITU-T (International Telecommunication
Union - Telecommunication Standardization Sector).
Fax machines that support the ECM communicate, while confirming that there is no error in the sent data.
This prevents image blurring caused by noise on the phone line.
By default, this machine uses ECM for transmission. If the noise level is high, the communication may take a
little longer than communication that does not involve ECM checking. To reduce the transmission time, you
can transmit faxes with ECM turned off. However, an image error or communication errors may occur de-
pending on the specified communication time value, so change the value to suit conditions.
Tips
If the ECM function is canceled, the following functions cannot be used together.
V34 OFF, Polling TX, Polling RX
Operation flow
1
Load the original.
2
Press the
Fax
key.
3
Specify the destination.
4
On the main screen (Fax mode), press the
+
or
,
key to select [Line Setting], then press the
Select
key.
5
Select [ECM OFF], then press the
Select
key.
6
Select [YES], then press the
Select
key.
7
Press the
Start
key.
Sending starts.