Konica Minolta bizhub C3110 bizhub C3110 Fax Functions User Guide - Page 29
Specifying a relay station for sending [F-Code TX] - default password
View all Konica Minolta bizhub C3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4.6 Specifying a relay station for sending ([F-Code TX]) 4 4.6 Specifying a relay station for sending ([F-Code TX]) Relay distribution The Relay Distribution function sends a fax to a relay station, which distributes the received fax to a pre-registered group of destinations. If you have created groups of a relay station and the other destinations by area, you can reduce the total communication cost compared to the cost of broadcasting to all destinations. This function is useful when broadcasting faxes to distant locations. Tips - The destination machine (relay station) must have the F-code function. - This machine supports the function (relay distribution request) to send a fax to a relay station. This ma- chine does not support the function (relay distribution) to use this machine as a relay station. - You need to check the registration number of the Relay RX User Box assigned to the relay station and the password for relay distribution in advance. - This function cannot be used together with the following functions: Polling TX, Polling RX Related setting (for the administrator) You can specify whether or not to use the F-Code TX function. To configure settings: [UTILITY] - [Admin Settings] - [Fax Settings] - [Function Settings] - [Func ON/OFFSetting] - [F-Code TX] (default: [ON]) Operation flow 1 Load the original. 2 Press the Fax key. 3 Specify the destination. 4 On the main screen (Fax mode), press the + or , key to select [F-Code TX], then press the Select key. 5 After enabling the F-Code TX function, enter the [SUB Address] and [Password], then press the Select key. % [Enable]/[Disable]: Select [Enable]. % [SUB Address]: Enter the registration number of the Relay RX User Box. % [Password]: Enter the password for the relay distribution. 6 Press the Start key. This starts the fax transmission to the relay station. Faxes received by a relay station are delivered to destinations registered with the relay station. [Fax Functions] 4-7