Konica Minolta magicolor plus magicolor plus Copyboard M-12S/M-12W/M-125 User - Page 20

Printing M-12S/M-12W M-125 Step 2 (continued) Notice • If the display content of the page indicator does not agree with that of the actual page, move the copyboard to either Page 1 or the S page. (Model M-125) • For model M-125, do not move the sheet surface by hand. Doing so could damage the copyboard. • For Models M-12S and M-12W, the sheet surface can be moved, but the Erase Reminder function may not work properly. Press the Color White. button and select Color or Black & Color mode lamp Lit Printing will be in color. Unlit Printing will be in black & white. Press the + button or the − button and select the number of copies. • When the power is switched on, one copy is selected. • A maximum of 20 copies can be set and the number of copies is displayed in the display window. • Each press of the + button increases the number of copies (by one) and each press of the − button decreases the number of copies. Press and hold the button to switch continuously. Press the Print button to print. • The reading operation is performed for a one-sheet portion (while the sheet is scrolled) and the printing operation is performed. Note • If the Feed/Stop button (for model M-125, the ON/Standby button) is pressed while the sheet surface is being read, printing is interrupted and only part of the image will be printed. To move the sheet surface, wait until scrolling stops, then press the Feed/ Stop button (for model M-125, the Page change / buttons). • When the fourth page has been printed, after the reading of the page is completed (i.e., printing is completed), there will be a return to Page 4. • When a USB memory has been inserted, a press of the Save button during printing will start the USB memory storage operation after printing is completed. (See Page E-24.) • The one-screen portion is reduced to A4 paper size and printed. For wide type copyboards (model M-12W), the image is compressed about 75% in the horizontal direction. To print with the same proportions as the image on the sheet surface, see "Printing in the same ratio as the sheet surface" (page E-23). • A flashing " " in the display window indicates a print error. See "Meaning of Error Messages" on Page E-33. E-20