Konica Minolta magicolor plus magicolor plus Copyboard M-12S/M-12W/M-125 User - Page 24

Using USB Memory The content of what has been drawn on the sheet surface of the copyboard can be saved in USB memory. Later, the saved image can be read into a personal computer and made into a document of the proceedings of the meeting, or affixed to a document. • What is needed to use the USB memory function USB memory: Commercially-available product Personal computer: The connector is a USB port (type A), and the interface supports USB 1.1 Note • The copyboard supports the USB memory formats of FAT and FAT 32. • The factory default for the resolution of images when storing them on USB memory devices is "Standard". There are two ways to switch this to a high resolution: by changing the copyboard's function Settings (see page E-29), or by setting "Resolution" in TOOLBOX to "High Resolution". (For instructions on operating TOOLBOX, see the separate "Software Operation Manual".) • More time is required for storing images when the resolution is set to high. Notice • For a description of the USB memory devices usable with this copyboard, please go to our website at: h t t p : / / w w w. p l u s - v i s i o n . c o m M-12S/M-12W USB Memory Storage Procedure Preparation: Check that the copyboard's AC power plug is connected to a wall power outlet. See page E-15. Press the ON/Standby button and switch on the power. M-125 Note • When turning on the power, wait about 5 seconds after connecting the copyboard's AC power plug to the wall power outlet or after turning off the power (standby mode) before pressing the ON/Standby button. • Press the ON/Standby button to switch on the power. The LED of the display window will light. Insert the USB memory device into the Memory (USB port) of the copyboard Notice • Check the side (polarity) of the USB memo- ry device before inserting it. Forcing it in the reverse orientation will damage the USB port or USB memory device. • Be careful not to bump into the USB memory device with hand or body while it is mounted. Doing so could damage the USB memory device or USB port. port Press the Feed/Stop button (for model M-125, the Page change / buttons) and display the sheet surface you want to store. For models M-12S and M-12W For model M-125 E-24