Konica Minolta magicolor plus magicolor plus Copyboard M-12S/M-12W/M-125 User - Page 21

Printing When the copyboard is not going to be used, press the ON/Standby button and switch off the power (standby mode). • Switch off the printer power. Note • When the Erase Reminder function is set to "Enable" When the ON/Standby button is pressed, the display window and all the indicators flash simultaneously, the sheet automatically moves to the surface that is not yet erased and the power turns off. (For Model M-125, the sheet moves to the start of the surface that is not yet Display window erased and the power turns off.) * The Erase Reminder function may not work properly due to dirt on the sheet's adhesive sections or marker residue. • If no button is operated for 30 minutes or greater, the unit is set to the sleep mode and the LEDs on the control panel turn off. If the power button is pressed, the LEDs on the display window turn on. If the print button is pressed at this time, the printing operation starts. Selecting the printing density Select this when the density of the print is light. Press the Density button and select darker or standard. Density mode lamp Lit Darker Unlit Standard Making additional copies This will print the copy of the sheet that was scrolled previously one more time. Press the Reprint button. This starts the printing of the image data that has accumulated in internal memory. Note • The sheet is not scrolled when additional copies are made. • The number of copies can be changed. To do so, make the change before pressing the Reprint button. • In repeat printing, the color/black & white and density settings will be the same as those of the prior printing. • When printing or USB memory storage has not been performed since switching on the power, image data will not have accumulated in the internal memory and this operation will not be possible. • If additional printing is set to "Disable" in the security function settings, display number "E8" is displayed. For details, see the separate "Software Operation Manual". Cancellation of the print operation in progress During the read operation (when the Print button was pressed) When the Feed/Stop button (for model M-125, the ON/Standby button) is pressed, the reading of the sheet stops (for model M-125, the copyboard returns to the original page), and the partially read image data is printed. Wait until the sheet is expelled from the printer. For models M-12S and M-12W For model M-125 E-21 Continued on next page