Home » Konica Minolta Manuals » Multifunction Devices » Konica Minolta bizhub 223 » Manual Viewer

Konica Minolta bizhub 223 bizhub 223/283/363/423 PKI Security Operations User - Page 37

Turn on the main power switch

View all Konica Minolta bizhub 223 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

2.7 Overwrite All Data Function 2 3 Select the desired mode and touch [Delete]. 4 A confirmation message appears. Select [Yes] and touch [OK]. 5 Make sure that a message appears prompting you to turn OFF and then ON the main power switch. Now, turn OFF and then turn ON the main power switch. % Check that all data has been overwritten and erased properly. Data is not erased properly if an error occurs during the procedure. For details, contact your Service Representative. % When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning it off. if there is no wait period between turning the main power switch off, then on again, the machine may not function properly. Here is the sequence, through which the main power switch and sub power switch are turned on and off: Turn off the sub power switch → Turn off the main power switch → Turn on the main power switch → Turn on the sub power switch % After the main power switch has been turned on, quickly turn it off and give the machine to the Service Engineer. If the Overwrite All Data function is executed by mistake, contact the Service Engineer. For details, contact your Service Representative. bizhub 423/363/283/223 2-25

Section	Page
Contents	2
1 Security	5
1.1 Introduction	5
Compliance with the ISO15408 Standard	5
Operating Precautions	5
INSTALLATION CHECKLIST	6
1.2 Security Functions	7
Check Count Clear Conditions	7
1.3 Data to be Protected	8
1.4 Precautions for Operation Control	9
Roles and Requirements of the Administrator	9
Password Usage Requirements	9
Operation and control of the machine	9
Network Connection Requirements for the Machine	10
Machine Maintenance Control	10
Implementing digital signature properly	10
Operating conditions for the IC card and IC card reader	10
IC card owner requirements	10
1.5 Miscellaneous	11
Password Rules	11
Precautions for Use of Various Types of Applications	11
Items of Data Cleared by Overwrite All Data Function	11
Items cleared by HDD Format	11
Fax functions	12
2 Administrator Operations	14
2.1 Accessing the Administrator Settings	14
2.1.1 Accessing the Administrator Settings	14
2.1.2 Accessing the User Mode	16
2.2 Preventing Unauthorized Access	18
Setting Prohibited Functions When Authentication Error	18
2.3 Setting the External Server	21
Setting the External Server	21
2.4 System Auto Reset Function	24
Setting the System Auto Reset function	24
2.5 Changing the Administrator Password	26
Changing the Administrator Password	26
2.6 Protecting Data in the HDD	28
2.6.1 Setting the Encryption Key (encryption word)	28
2.6.2 Changing the Encryption Key	34
2.7 Overwrite All Data Function	36
Setting the Overwrite All Data function	36
2.8 S/MIME Communication Setting Function	38
Setting the S/MIME Communication	38
2.9 PC-Fax RX Setting Function	41
PC-Fax RX Setting	41
2.10 TSI User Box Setting Function	43
TSI User Box Setting	43
2.11 TCP/IP Setting Function	45
2.11.1 Setting the IP Address	45
2.11.2 Registering the DNS Server	45
2.12 NetWare Setting Function	46
Making the NetWare Setting	46
2.13 SMB Setting Function	47
Setting the NetBIOS Name	47
2.14 E-Mail Setting Function	48
Setting the SMTP Server (E-Mail Server)	48
3 User Operations	50
3.1 User Authentication Function	50
User authentication using the IC card	50
3.2 Encrypted Document Function	52
Accessing the Encrypted document	52
3.3 Scan to Me Function	53

Match case Limit results 1 per page

bizhub 423/363/283/223

2-25

2.7

Overwrite All Data Function

Select the desired mode and touch [Delete].

A confirmation message appears. Select [Yes] and touch [OK].

Make sure that a message appears prompting you to turn OFF and then ON the main power switch.

Now, turn OFF and then turn ON the main power switch.

Check that all data has been overwritten and erased properly. Data is not erased properly if an error

occurs during the procedure. For details, contact your Service Representative.

When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after

turning it off. if there is no wait period between turning the main power switch off, then on again, the

machine may not function properly.

Here is the sequence, through which the main power switch and sub power switch are turned on

and off:

Turn off the sub power switch

→

Turn off the main power switch

→

Turn on the main power switch

→

Turn on the sub power switch

After the main power switch has been turned on, quickly turn it off and give the machine to the Ser-

vice Engineer. If the Overwrite All Data function is executed by mistake, contact the Service Engi-

neer. For details, contact your Service Representative.