Kyocera ECOSYS FS-2020D FS-2020D/3920DN/4020DN Operation Guide (Basic) - Page 43
Password, >NetWare, >AppleTalk, >IPP, >SSL Server, >IPSec, NetWare, AppleTalk, IPSec - default password
View all Kyocera ECOSYS FS-2020D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
ID _ Password _ 3 Press Z. Each time you press U or V, the selection changes. Refer to the explanations below when specifying the settings. If you are using NetWare, AppleTalk, IPP, SSL Server or IPSec to connect to a network, you must enter an administrator ID and press [OK]. The default setting is the numeric part of your printer's model name. If you use FS-2020D, enter "2020". If you are using NetWare, AppleTalk, IPP, SSL Server or IPSec to connect to a network, you must enter an administrator password and press [OK]. The default setting is the numeric part of your printer's model name. If you use FS-2020D, enter "2020". >NetWare On Set this item to On when you connect to a network using NetWare. > In submenu, frame mode can be selected from Auto, 802.3, Ethernet-II, SNAP and 802.2. >AppleTalk On AppleTalk must be activated (On) for networking with Macintosh computers. >IPP Off Set this item to On when you connect to a network using IPP. >SSL Server Off >IPSec Off Connecting and Printing Set this item to On when you connect to a network using SSL Server. Submenu has items including DES, 3DES, AES, IPP over SSL and HTTPS. Set this item to On when you connect to a network using IPSec. Continued on next page. 3-7