Kyocera KM-5530 LDAP Converter Operation Guide - Page 13

Result Codes, Bad Search Filter : A restriction occurred

Page 13 highlights

Section 1 Settings and registration for the LDAP Converter Utility 1-7 Result Codes The result codes that are generated during communication with the LDAP server and the procedures for correcting any errors which may occur are as follows. The result codes are recorded in the log file and result messages will appear in the Communication Result Log. Result Code OK Result Message: Explanation Complete : Communication was accomplished successfully. - - - Procedure for Correction E01 Failure : Data could not be retrieved from Verify that there is no abnormality with network the server. cables or any other connections. If connections are appropriate, verify with your systems administrator that the settings in the LDAP Converter Utility are correct and that the LDAP server is running properly. E02 Cancel : Connection to the server was canceled. - - - E03 Bad DN : The data registered under "dn" Verify with your systems administrator that the (department name) is not valid. LDAP server is running properly. E04 Bad Search Filter : A restriction occurred in relation to the search filter settings E05 Authentication Error : An authentication error has occurred. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

13
Section 1 Settings and registration for the LDAP Converter Utility
1-7
Result Codes
The result codes that are generated during communication with the LDAP server and the procedures for
correcting any errors which may occur are as follows.
The result codes are recorded in the log file and result messages will appear in the Communication Result Log.
OK
E01
E02
E03
E04
E05
– – –
Verify that there is no abnormality with network
cables or any other connections. If connections
are appropriate, verify with your systems
administrator that the settings in the LDAP
Converter Utility are correct and that the LDAP
server is running properly.
– – –
Verify with your systems administrator that the
LDAP server is running properly.
Result
Code
Result Message: Explanation
Procedure for Correction
Complete :
Communication was
accomplished successfully.
Failure : Data could not be retrieved from
the server.
Cancel : Connection to the server was
canceled.
Bad DN : The data registered under “dn”
(department name) is not valid.
Bad Search Filter : A restriction occurred in
relation to the search filter settings
Authentication Error : An authentication
error has occurred.