LG 32LD655H Setup Guide - Page 17
Installer Menu Items 073 through 119
View all LG 32LD655H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installer Menu (Cont.) Installer Menu Items 073 through 119 Menu Item Function 073 CH NOT AVBLE 075 REVERT CH 078 UPN MSB 079 UPN MSB-1 080 UPN MSB-2 081 UPN LSB 082 CHKSM ERROR 083 HANDSHK TIME 084 PERMANENT BLK Value Range Default Value Brief Description of Function and Comments 0 / 1 0 / 1 0 ~ 255 0 ~ 255 0 ~ 255 0 ~ 255 0 / 1 0 ~ 5 0 / 1 0 If set to 1 and Channel Override is 0, "NOT AVAILABLE" message is displayed when directly accessing a channel not in the favorite Channel List. 0 If set to 1 and loss of MPI communication occurs, TV tunes to Start Channel. 0 User programmable number, most significant byte. 0 User programmable number, most significant byte - 1. 0 User programmable number, most significant byte - 2. 0 User programmable number, least significant byte. 1 Enforces rigid MPI checksum. 5 Relaxes MPI timing to be compatible with PC-based Windowscontrolled systems. 0 Removes block hours setting for Parental Control and makes block permanent. 087 REAR RGB EN. 088 EN NOISE MUTE 090 KEY LOCK 091 YPrPb2 EN 093 RJP AVAILABLE 0 / 1 / 17 (LD65xH) 1 (LD65xH) 0 / 2 / 18 (LG710H) 2 (LG710H) 0 / 1 1 0 / 1 0 0 / 1 1 0, 1, 2, 5, 6 0 Dependent on item 093 RJP AVAILABLE setting. Set to 0 to disable RGB1. Set to 1 (LD65xH) / 2 (LG710H) to enable for RGB PC. Set to 17 (LD65xH) / 18 (LG710H) for Auto Configure. If set to 1, audio is muted if no signal is present. If set to 1, keyboard is locked out, IR is still functional. Set to 1 to enable HDMI 2 input. Set to 0 to disable. Set to 1, 2, 5, or 6 for HDMI or DVI Mode. (See detailed descriptions.) 094 SAP MENU EN 0 / 1 1 Set to 0 to disable feature on Function Menu. Set to 1 to enable feature on Function Menu. 096 DEF. ASP. RATIO 0 ~ 4 2 Sets default aspect ratio at power up. See detailed descriptions and item 106. 099 BACK LIGHTING 1 ~ 100, 101 ~ 200, 201, 202, 255 202 Sets the level of the TV picture back lighting. (See detailed descriptions.) 102 ATSC BAND 103 ATSC TUNE MODE 104 START MINOR CH 106 ASP RATIO LOCK 116 VIDEO MUTE EN 0 ~ 4 0 / 1 0 ~ 255 0 / 1 0 / 1 4 Selects ATSC band. 1 Set to 1 (default) for Physical Channel scan. Set to 0 for Virtual Channel scan. 0 Selects Minor Start Channel. Set to 0 for NTSC. 0 To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle. 0 Set to 0 for Normal. Set to 1 for Blank. 117 FACT DEFAULT 0 / 1 0 Set to 0 for Normal. Set to 1 to load presets for all Installer Menu settings. 118 POWER SAVINGS 1 / 3 / 7 If set to 1, the b-LAN module is always powered. If set to 3, the b-LAN module 3 is only powered when TV is turned ON. If set to 7, the b-LAN module is never powered. For LD65xH TVs: If an MPI card is installed, POWER SAVINGS must be set to 1. (See detailed descriptions.) 119 DATA CHANNEL 0 ~ 135 0 Set to 0 to disable. Set to the RF channel number of the Data Channel for Pro:Centric operation. 206-4137 17