LG 32LD655H Setup Guide - Page 35

Reference: Upgrading TV/PTC Software with a USB Memory Device Checking the Software Versions You can check the software versions of the TV by accessing the Installer Menu: Press MENU repeatedly until the on-screen menu locks up, and then press 9-8-7-6 + ENTER. When you are finished, press ENTER again to exit the Installer Menu. XXLG710H PTC INSTALLER MENU 000 INSTALLER SEQ 000 Typical Installer Menu UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 PTC Version CPU Version Upgrading TV/PTC Software Before you begin, note that the software upgrade files must be stored in a folder named "LG_DTV" in the root directory of USB memory device. 1. Turn the TV ON. 2. Plug the USB memory device into the USB IN port on the TV. Note: Ensure the memory device has been formatted with FAT format. 3. Press MENU to display the TV setup menus. 4. Use the arrow navigation keys to select/highlight the Option menu icon; then, press the number "7" key a total of seven times to display the USB Download Menu. 5. Use the Up/Down arrow keys to select Upgrade TV Software or Upgrade PTC Software, as applicable, and press ENTER. (See screen samples at right. The TV Software Upgrade screen provides information on the current software as well as the potential software to be downloaded.) 6. Use the Up/Down arrow keys to select/highlight the upgrade to install and press ENTER. Copying progress will be shown. When the upgrade is complete, the TV will turn OFF. 206-4137 USB Download Menu Upgrade TV Software Upgrade PTC Software Teach To TV TV Software Upgrade i TV Software Update [ Current TV Software Version Information ] epak : 3.0b.0 rootfs(RELEASE) : 0.00.1 model(RELEASE) : 3.12.0 emanual(RELEASE) : 0.00.1 ezcal(RELEASE) : 3.0b.0 kernel(RELEASE) : 3.12.0 lgfont(RELEASE) : 3.12.0 micom(RELEASE) : 0.d0.b8 cpak : 3.31.0 lgres(RELEASE) : 3.31.0 ezcal(RELEASE) : 3.31.0 kernel(RELEASE) : 0.00.1 710H_V3.31_usb lgapp(RELEASE) : 3.31.0 model(RELEASE) : 3.31.0 boot(RELEASE) : 0.00.1 rootfs(REA/LEASE) : 0.00.1 PTC Software Upgrade i Upgrade PTC Software The following software files are found in the memory card. PTC_xx710H_v1.00.014 ! TV Software Update UPGRADING... Do not unplug! 27% ! Upgrade PTC Software UPGRADING... Do not unplug! 25% Note: (TV Software Upgrades only) If the TV detects a later version of software on the USB device, it will automatically display a dialog from which you can start the software upgrade immediately. Otherwise, you can close the dialog, and access the USB Download Menu as described in the procedure. 35