LG 32LD655H Setup Guide - Page 6

Setup Checklist / Overview Setup Checklist Installation and Setup Checklist __ Unpack TV and all accessories. __ Install batteries in remote control. __ Install TV on VESA mount or stand. Note: It may be advisable to make all cable connections before installing on VESA mount or stand, as appropriate. Hardware Connections __ Install any additional hardware as appropriate to your institution, LAN, etc. Commercial Mode Setup __ Complete Commercial Mode Setup (configure all relevant Installer Menu items as required of your institution and configure display features for the end user). Software Installation __ Install or configure any software, as applicable, for example, PPV, etc. Cable Connections __ Make all connections to rear jack panel and RF antenna on MPI/PPV card. __ Make all connections to signal, interactive resources, and Aux sources, as appropriate. Commercial Mode Setup Overview This document describes how to set up LD650H/LD655H/LG710H Pro:Centric™ TVs for Commercial Mode either while in the Embedded b-LAN™ (EBL) module's Pass-through Mode or its Free-To-Guest (FTG) Mode. Note: The b-LAN module is internal to the TV and allows the hotel/institution head end equipment to communicate with the TV for configuration and control. See Reference section, "b-LAN Setup & Overview," for further information. The b-LAN module also comprises the data tuner required for Pro:Centric operation (see next page). Pass-through Mode This mode allows you to configure a Master TV Setup for cloning purposes as well as external VOD/PPV control. Use the Installer Remote to configure Installer Menu items as required for TV operation and set up TV features (Channel, Picture, Audio, etc.). See pages 13 to 14 for detailed information. FTG Mode This mode enables Pro:Idiom® decryption and also allows logical channel mapping of physical channels to remove the need for dash tuning. FTG Configuration Application software is used to configure and/or edit Channel Map and Installer Menu settings. See pages 24 to 27 for further information on FTG Mode and local configuration using a PC with the FTG Configuration Application. Since these TV models are equipped with the EBL Module, they can also be broadcast configured in FTG Mode by a Free-To-Guest Management Appliance (FMA) head end device. Refer to the Free-To-Guest (FTG) Configuration Application manual and/or the Installation & Setup manual for the FMA device. 6 206-4137