LG 32LD655H Setup Guide - Page 23
Adding Channel Label Icons / Custom Channel Labels, 5-4 + MENU Mode
View all LG 32LD655H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Adding Channel Label Icons / Custom Channel Labels (2-5-4 + MENU Mode) Editing/Adding Channel Icons and/or Labels If there is no pre-assigned icon, you can make a custom channel label of up to seven (7) characters to help identify a channel or network. If desired, channel labels can also be added in addition to a pre-assigned icon. You may also add labels for the Aux input sources to clearly identify the devices that are connected to the Aux inputs. (Icon) XYZ XYZ XYZ 1234 567 NETWORK (Label) Editing and adding the labels can only be done if there are channels entered into the TV's Channel Map either during Commercial Mode Setup (see pages 13 to 14), by cloning, or by using some PPV provider's master remote controls. Note: A blank letter space is available between "Z" and "!". To perform channel editing/labeling: 1. Enter the TV Installer Menu. 2. Press 2-5-4 + MENU on the Installer Remote to enter the Channel Label Editing Mode. 3. Add channel icons and channel labels as described in the procedures below. (You can do this more than once.) 4. To exit the menu when you are done, press MENU. Changing a Channel's Icon on the Master TV 1. Use Channel Up/Down to select the channel for which to change the icon. 2. Use the Left/Right arrow keys to select the thin letter "I" on the Channel ID display. 3. Use the Up/Down arrow keys to select the icon with which you want to identify the channel. (If you know the icon number, enter the number, and press ENTER.) 4. Proceed to change/add channel labels, or go to the next channel. Changing/Adding Channel Labels on the Master TV 1. Use Channel Up/Down to select the desired channel. 2. Press the Left/Right arrow repeatedly until the numbers 1 to 7 appear on the display. The number shows the position of the character that can be changed. Number 1 is the first character, number 2 the second character, etc. 3. Use the Up/Down arrow keys to select the desired character. 4. Proceed to the next number position, or use Channel Up/Down to go to the next channel. Changing Source Labels on the Master TV 1. Press INPUT to select the desired Aux input source: A/V 1, A/V 2, HDMI Component, RGB, etc. 2. Press the Left/Right arrow repeatedly until the numbers 0 to 9 appear on the display. The number shows the position of the character that can be changed. 3. Use the Up/Down arrow keys to select the desired character. 4. Press INPUT for the next Aux source, or proceed to change an icon or change/add labels. Use Channel Up/Down to return to channels. Installer Remote Control Key Functions for Master TV Channel Editing/Labeling Menu • Channel Up/Down: Tunes in the next channel in scan. • Left/Right Arrows: Select the item to change. If "I" is shown, the icon can be changed. If a number is shown, it indicates the position of the character that can be changed. • Up/Down Arrows: Select the icon or the character to be displayed. Tip: Arrows can be held down for fast scrolling. • 0 - 9: Use to enter the index number of the icon, if known. • ENTER: Changes the icon after the number has been entered. • INPUT: Changes the Aux input label. • MENU: Exits the editing process. 206-4137 23