LG 60PB4DT-UB Owner's Manual (English) - Page 35

EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Overview When RGB connect to PC output and select the RGB-PC in Main Input, this function is used. When HDMI IN 1(DVI) connect to PC output and select HDMI1/DVI input, this function is used. In RGB-DTV mode, SIZE and PHASE is not available. FLASHBK APM CC EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, Phase, Reset 1 Press the ADJUST button and then use D or E button to select Position, Size, or Phase. 2 Press the ENTER button and then use D / E or F / G button to make appropriate adjustments. I The Phase adjustment range is -16 ~ +16. I The Size adjustment range is -30 ~ +30. 3 Press the ENTER button. Initializing (Reset to original factory values) To initialize the adjusted values. Position G Size Phase Reset Adjust Close Position This function is to adjust picture to left/right and up/down as you prefer. Size This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters. In HDMI/DVI-PC mode, PHASE is not available. 1 Press the ADJUST button and then use D or E button to select Reset. 2 Press the ENTER button and then use F or G button to select Yes. Position Size Phase Reset G Adjust Previous Initialize Settings Yes No Move Select 3 Press the ENTER button. 34