LG LMU240HE Service Manual - Page 45
Function of Indoor Unit
View all LG LMU240HE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Function of Indoor Unit Operation Split Type Indoor Unit Operation ON/OFF by Remote controller Sensing the Room Temperature • Room temperature sensor. (THERMISTOR) Room temperature control • Maintains the room temperature in accordance with the Setting Temp. Starting Current Control • Indoor fan is delayed for 5 seconds at the starting. Time Delay Safety Control • Restarting is delayed for approx. 3 minutes. Indoor Fan Speed Control • High, Med, Low, Chaos, Jet Cool Operation indication Lamps (LED) On/Off : Lights up during the system operation. Sleep Mode : Lights up during Sleep Mode Auto operation. Timer : Lights up during Timer operation. Defrost Mode : Lights up during Defrost Mode or Hot Start operation (Heat pump model only) Outdoor unit : Lights up during outdoor unit operation.(Cooling model only) operation Desire temperature For cooling,dehumidification,heating modes it display Destired temperature indicator • Cooling : 18°C~30°C(64°F~86°F) • AI : Auto Operation • Dehumidification : 18°C~30°C(64°F~86°F) • Po : Jet Cool • Heating : 16~30°C(60°F~86°F) • Lo : Test Mode Plasma : The function illustrates its dynamic mode by using a multiple lighting system. (Optional) Soft Dry Operation Mode • Intermittent operation of fan at low speed. Sleep Mode Auto Control • The fan is switched to low(Cooling), med(Heating) speed. • The unit will be stopped after 1, 2, 3, 4, 5, 6, 7 hours. Natural Air Control by CHAOS Logic • The fan is switched to intermittent or irregular operation • The fan speed is automatically switched from high to low speed. * Airflow Direction Control • The louver can be set at the desired position or swing up and down automatically.(Model base) Deice (defrost) control (Heating) • Both the indoor and outdoor fan stops during deicing. • Hot start after deice ends. Hot-start Control (Heating) • The indoor fan stops until the evaporator piping temperature will be reached at 27°C(80.6°F). "Wall Mounted Type is standard" * Functions is dependent on model type. Service Manual 45