LG LSC121PMA Service Manual - Page 32

Operation Name and Function-Remote Control The remote control transmits the signals to the system. Signal transmitter 5 1 6 3 4 2 10 CANCEL 7 9 ON OFF SET 11 AUTO CLEAN 8 12 13 14 Flip-up door (opened) Operation Mode Cooling Operation Auto Operation Healthy Dehumidification Operation 1 START/STOP BUTTON Operation starts when this button is pressed and stops when the button is pressed again. 2 OPERATION MODE SELECTION BUTTON Used to select the operation mode. 3 ROOM TEMPERATURE SETTING BUTTONS Used to select the room temperature. 4 INDOOR FAN SPEED SELECTOR Used to select fan speed in four steps low, medium, high and CHAOS. 5 JET COOL/HEATING Used to start or stop the speed cooling/heating. (speed cooling/heating operates super high fan speed in cooling/heating mode) 6 CHAOS SWING BUTTON Used to stop or start louver movement and set the desired up/down airflow direction. 7 ON/OFF TIMER BUTTONS Used to set the time of starting and stopping operation. 8 TIME SETTING BUTTONS Used to adjust the time. 9 TIMER SET/CANCEL BUTTON Used to set the timer when the desired time is obtained and to cancel the Timer operation. 10 SLEEP MODE AUTO BUTTON Used to set Sleep Mode Auto operation. 11 AIR CIRCULATION BUTTON Used to circulate the room air without cooling or heating. 12 ROOM TEMPERATURE CHECKING BUTTON Used to check the room temperature. 13 RESET BUTTON Used prior to resetting time or after replacing batteries. 14 2nd F Button Used prior to using modes printed in blue at the bottom of buttons. Heating Operation • Cooling Model( ), Heat Pump Model( ) -32-