LG WM3460CW Owners Manual - Page 23
Time and Status Display, Cycle Status Indicator, Door Lock Indicator, Power, Estimated Time Remaining
View all LG WM3460CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Time and Status Display 1 Cycle Status Indicator These LEDs illuminates when a cycle is selected to indicate which stages runs. When a cycle is running, the LED for the active stage blinks, and the LEDs for the remaining stages remain steady. Once a stage is complete, the LED turns off. If a cycle is paused, the active stage LED stops blinking. 2 Door Lock Indicator The Door Lock indicator will light up once a cycle has started. The indicator light will stay on until the cycle is paused, stopped or has finished. 3 Control Lock Indicator When the control lock function is activated, the LED lights up. When the control lock function is set, all controls are disabled except for the Power button. Once the control lock function is disabled, the LED turns off. 4 Estimated Time Remaining When a cycle is selected, the default time for that cycle is displayed. This time will change as modifiers or options are selected. Once the Start/Pause button is pressed, the washer will measure the size of the load. The estimated time may change once the load size has been measured. If Delay Wash is set, the remaining delay time counts down until the cycle begins. NOTE •• The time shown is only an estimate. This time is based on normal operating conditions. Several external factors (load size, room temperature, incoming water temperature, etc.) can affect the actual time. OPERATION 23 ENGLISH