LG WM3460CW Owners Manual - Page 39

ENGLISH Care in Cold Climates Storing the Washer If the washer will not be used for an extended period of time and is in an area that could be exposed to freezing temperatures, perform the following steps to protect the washer from damage. 1 Turn off the water supply. 2 Disconnect the hoses from the water supply and drain any water from the hoses. MAINTENANCE 39 When the Water Line is Frozen 1 Turn off the faucets connected to the water lines. 2 Pour hot water on the frozen faucets to thaw the water lines and remove them. 3 Immerse the water lines in hot water to thaw them. 4 Connect the water lines with the water inlets of the washer and with the faucets. See Connecting the Water Lines for details. 3 Plug the power cord into a properly grounded electrical outlet. 4 Add 1 gallon of nontoxic recreational vehicle (RV) antifreeze to the empty drum and close the door. Never use automotive antifreeze. 5 Press the Power button, then select Spin. 6 Press the Start/Pause button to start the drain pump. 7 Allow the drain pump to run for one minute, then press the Power button to shut off the washer. This will expel some of the antifreeze, leaving enough to protect the washer from damage. 8 Unplug the power cord, dry the drum interior with a soft cloth, and close the door. 9 Remove the inserts from the dispenser. Drain any water in the compartments and let them dry. 5 Turn on the faucets. 6 Press the Power button. 7 Press the Spin button. 8 Press the Start/Pause button. Verify the water fills properly. When the Drain Line is Frozen 1 Pour hot water in the washer drum and close the lid. Wait for 1-2 hours. 2 Press the Power button after thawing. 3 Press the Spin button to select draining and spinning. 4 Press the Start/Pause button. Check to make sure the water drains. 10 Store the washer in an upright position. 11 To remove the antifreeze from the washer after storage, run a complete Speed Wash cycle using detergent. ••Do not add laundry to this cycle.