LG WT5101HW Owner's Manual - Page 13
HOW TO USE - settings
View all LG WT5101HW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH CONTROL PANEL FEATURES A F HOW TO USE B C D E A POWER ON/OFF BUTTON Press to turn the washer ON. Press again to turn the washer OFF. NOTE: If the washer remains idle for 4 minutes after turning the washer off, the water in the tub will drain. NOTE: An alarm will sound 1 minute prior to draining, and 'dr' will appear on the display. You may restart the washer at this time. However, once the washer initiates draining, all functions will be suspended, and 'dr' will be displayed until draining is complete. B CYCLE SELECTOR KNOB Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display. These settings can be adjusted using the cycle setting buttons before starting the cycle. C START/PAUSE BUTTON Press this button to START the selected cycle. If the washer is running, use this button to PAUSE the cycle without losing the current settings. NOTE: If you do not press the START/PAUSE button within 4 minutes of selecting a cycle, the washer automatically turns off. NOTE: If the washer remains idle for 8 minutes after pausing the cycle, the water in the tub will drain. D CYCLE MODIFIER BUTTONS Use these buttons to select the desired cycle options for the selected cycle. Press the button for that setting until the indicator light for the desired value is lit. E OPTION BUTTONS The option buttons allow you to select additional cycle options and will light when selected. Certain buttons also allow you to activate special functions by pressing and holding the button for 3 seconds. For detailed information about the individual options, please see the following pages. F LED DISPLAY The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on through the cycle. 13