Lenovo J110 Hardware Maintenance Manual - Page 119
one corner is aligned with the corresponding triangle on the microprocessor socket.
View all Lenovo J110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Notes: a. Your microprocessor and socket might look different than the one illustrated. b. Note the orientation of the microprocessor in the socket. Look for the small triangle on one corner of the microprocessor. This is important when reinstalling the microprocessor on the system board. c. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. 8. Make sure that the small handle is in the raised position. 9. Holding the microprocessor with your fingers, position the microprocessor so that the small triangle on one corner is aligned with the corresponding triangle on the microprocessor socket. 10. Holding the microprocessor with your fingers, remove the protective cover 2 that protects the gold contacts on the new microprocessor 1 . 11. Lower the microprocessor straight down into the system board socket of the new system board. Chapter 9. Replacing FRUs (Types 7390, 7391, 7392, 7396, 7397, and 7398) 113