Lenovo J110 Hardware Maintenance Manual - Page 120
Replacing the hard disk drive
View all Lenovo J110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
12. Lower and latch the handle to secure the microprocessor in the socket. 13. Use the thermal grease syringe to place five drops of grease on the top of the microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the grease syringe). 14. Install the heat sink and fan assembly on the system board. 15. Connect the heat sink and fan assembly to the system board. See "Identifying parts on the system board" on page 71 . 16. Position the fan duct on the heat sink fan. 17. Go to "Completing the FRU replacement" on page 117. Replacing the hard disk drive 1. Remove the cover.See "Removing the cover" on page 94. 2. Remove the drive bay assembly. See "Removing and replacing the drive bay assembly" on page 97. 3. Remove the two screws that secure the hard disk drive bracket. 114 Hardware Maintenance Manual Lenovo 3000 J Series