Lenovo ThinkCentre A62 (English US/UK) User guide - Page 42

Remove the retainer bracket from the drive being replaced and install it on a, drive cage.

Get Lenovo ThinkCentre A62 PDF manuals and user guides View all Lenovo ThinkCentre A62 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer. 2. Remove the computer cover. See "Removing the computer cover" on page 16. 3. Disconnect the signal and power cables from the rear of the optical drive. 4. Press the blue release button and remove the optical drive out of the front of the computer. Note: There is a spare retainer bracket 1 attached to the side of the upper drive cage. Figure 24. Removing the optical drive 5. Remove the retainer bracket from the drive being replaced and install it on a new drive. Figure 25. Retainer bracket for optical drive 6. Slide the new optical drive into the bay from the front until it snaps into position. 7. Connect the signal and power cables to the drive. 8. Go to "Completing the parts replacement" on page 45. 34 User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
1.
Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
2.
Remove the computer cover. See “Removing the computer cover” on page 16.
3.
Disconnect the signal and power cables from the rear of the optical drive.
4.
Press the blue release button and remove the optical drive out of the front of
the computer.
Note:
There is a spare retainer bracket
±1²
attached to the side of the upper
drive cage.
5.
Remove the retainer bracket from the drive being replaced and install it on a
new drive.
6.
Slide the new optical drive into the bay from the front until it snaps into
position.
7.
Connect the signal and power cables to the drive.
8.
Go to “Completing the parts replacement” on page 45.
Figure 24. Removing the optical drive
Figure 25. Retainer bracket for optical drive
34
User Guide